Configure Apache server (1)

Source: Internet
Author: User
Tags types of functions
The configuration file of the Apache server is located in the usrlocalapacheconf directory. Traditionally, three configuration files httpd. conf, access. conf, and srm. conf are used to configure the behavior of the Apache server. Httpd. conf provides the most basic server configuration, which describes how the daemon httpd runs. srm. conf is a service.

The configuration file of the Apache server is located in the/usr/local/apache/conf/directory. Traditionally, three configuration files are used: httpd. conf, access. conf and srm. conf to configure the behavior of the Apache server. Httpd. conf provides the most basic server configuration, which describes how the daemon httpd runs. srm. conf is a service.

Apache ServerThe setting file is located in the/usr/local/apache/conf/directory. ConfigurationFile httpd. conf, access. conf, and srm. conf. ConfigurationApache Server.

Httpd. conf provides the most basic Server ConfigurationIs a technical description of how the daemon httpd runs. srm. conf is ServerResource ing file, tell ServerMIME types of various files, and how to support these files; access. conf is used Configuration ServerControl the access permissions of different users and computers. ConfigurationFile Control ServerFor the normal operation ServerYou need to set these three files.

In addition to these three settings files, Apache uses the mime. types file to identify different files.

For the corresponding MIME type, the magic file sets some special identifiers for different MIME types, so that Apache ServerWhen the MIME type of a file cannot be determined from the document suffix, the MIME type of the file can be determined through these special marks in the file content.

Bash-2.02 $ ls-l/usr/local/apache/conf

Total 100

-Rw-r -- 1 root wheel 348 Apr 16 16:01 access. conf

-Rw-r -- 1 root wheel 348 Feb 13 access. conf. default

-Rw-r -- 1 root wheel 30331 May 26 08:55 httpd. conf

-Rw-r -- 1 root wheel 29953 Feb 13 httpd. conf. default

-Rw-r -- 1 root wheel 12441 Apr 19 :42 magic

-Rw-r -- 1 root wheel 12441 Feb 13 magic. default

-Rw-r -- 1 root wheel 7334 Feb 13 mime. types

-Rw-r -- 1 root wheel 383 May 13 srm. conf

-Rw-r -- 1 root wheel 357 Feb 13 srm. conf. default

In fact, in the current version of Apache, all the original httpd. conf, srm. conf, and access. conf ConfigurationAll parameters are placed in one ConfigurationIn the httpd. conf file, only three configuration files are used for compatibility with previous versions (the three configuration files are used in NCSA-httpd mode ). ConfigurationFile. The access. conf and srm. conf files provided do not have specific settings.

In the new version of Apache, all the settings are placed in httpd. conf, so you only need to adjust the settings in this file. The following uses the httpd. conf provided by default as an example to explain how

Configuration options of the server. However, you don't have to worry about providing too many parameters. Basically

The parameters are clear, or you can run Apache without modifying it. Server. However, if you need to adjust the Apache service

You need to understand the meaning of the parameters.

About Apache ServerThere is a lot of controversy over the Internet. Basically, users who use Apache have almost no doubt about its excellent performance. Apache also supports many well-known high-load websites, however, in the evaluation of commercial organizations, Apache often has a low score. Many people pointed out that in these evaluations, commercial Web ServerAnd its operating systems are often adjusted by the engineers of their professional companies, while the Free operating system and Web ServerThe default value is often used. ConfigurationOr just make small changes. In addition to the performance adjustment of the operating system ServerDefault ConfigurationIt is by no means the most optimized and efficient, but to adapt to the setting of almost all types of operating systems and all types of hardware. multi-platform software cannot provide the optimal default for specific platforms and specific hardware. Configuration. Therefore, performance adjustment is essential when Apache is used.

Another fact ignored in business evaluation is that different types of functions are often compared during evaluation.

For example, the performance of Standard CGI using Apache, ISAPI, and NSAPI ServerAPI comparison, in fact, Apache ServerThe functions that can be compared with modperl, FastCGI, and PHP are similar to ASP. However, due to the open mode of Apache, these functions are developed by independent developers, implemented as an independent module. However, during the evaluation, the tester did not add a corresponding module to evaluate its performance.

Running Parameters of the HTTP daemon

Httpd. conf defines the parameters required by the httpd daemon to determine the running mode and environment.

ServerType standalone

ServerType Definition ServerThe default value is standalone and httpd.

ServerIt will be started by itself and will reside in the host to monitor connection requests. In Linux, the Web will be automatically started in the startup file/etc/rc. d/rc. local/init. d/apache. ServerThis method is recommended.

Start Apache ServerThe other method is the inet method. ServerInetd monitors connection requests and starts Server. When you need to use the inetd startup method, you need to change it to this setting and block/etc/rc. d/rc. local/init. d/apache file, and change/etc/inetd. conf and restart inetd, then Apache can start from inetd.

The difference between the two methods is that ServerManage your own startup processes.

Start immediately ServerMultiple copies, each of which reside in the memory. A connection request can be processed immediately without the need to generate a sub-process. The response to client browser requests is faster and the performance is better.

High. The inetd method starts http only after inetd discovers a connection request. ServerBecause the inetd needs to listen to too many ports, the response is slow and the efficiency is low, but the Web ServerResources used. Therefore, the inetd method is only used for access that is occasionally accessed and does not require access speed. Server. In fact, the inetd method is not suitable for http burst and multi-connection features, because a page may contain multiple images, and each image will cause a connection request, even though the number of visitors causes less teaching, however, there are many transient connection requests, which are limited by the performance of inetd and may even affect other inetd-Enabled ServerProgram.

ServerRoot "/usr/local"

ServerRoot is used to specify the running directory of the daemon httpd. After httpd is started

The current directory of the process is changed to this directory. Therefore, if the specified file or directory is

The actual path is located under the path defined by ServerRoot.

Because httpd often performs concurrent file operations, it is necessary to use the locking method to ensure that file operations do not conflict. Due to the limited file lock capabilities of the NFS file system, therefore, this directory should be a local disk file system instead of an NFS file system.

# LockFile/var/run/httpd. lock

The LockFile parameter specifies the lock file of the httpd daemon. You do not need to set this parameter. ServerThe operation is automatically performed in the path under ServerRoot. However, if ServerRoot is an NFS file system, you need to use this parameter to specify the path in the local file system.

PidFile/var/run/httpd. pid

The process Number of the httpd daemon is recorded in the file specified by PidFile. Because httpd can automatically copy itself, there are multiple httpd processes in the system, but only one process is the process initially started, it is the parent process of other processes. sending signals to this process affects all httpd processes. The process Number of the httpd parent process is recorded in the file defined by PidFILE.

ScoreBoardFile/var/run/httpd. scoreboard

Httpd uses ScoreBoardFile to maintain internal data of a process. Therefore, you do not need to change this parameter unless the administrator wants to run several Apache ServerIn this case, each Apache ServerYou must set the htt pd. conf file independently and use different scoreboardfiles.

# ResourceConfig conf/srm. conf

# AccessConfig conf/access. conf

The two parameters ResourceConfig and AccessConfig are used to be compatible with the old version of Apache that uses the srm. conf and access. conf file. If there is no compatibility requirement, you can specify the corresponding setting file as/dev/null. This indicates that no other setting file exists and only httpd is used. conf file to save all the settings.

Timeout 300

Timeout defines the client program and ServerThe timeout interval of the connection. After the timeout interval (in seconds) is exceeded ServerThe connection to the client is closed.

KeepAlive On

In HTTP 1.0, only one HTTP request can be transmitted over one connection, while the KeepAlive parameter is used to support one connection and multiple transmission functions in HTTP 1.1, in this way, multiple HTTP requests can be transmitted in a connection. Although this function is only supported by newer browsers, this option is still enabled.

MaxKeepAliveRequests 100

MaxKeepAliveRequests is the maximum number of HTTP requests that a connection can perform. Set

If the value is set to 0, infinite transmission requests can be made in one connection. In fact, no client program requests too many pages in a single connection. Generally, the connection is completed if this limit is not reached.

KeepAliveTimeout 15

KeepAliveTimeout tests the time between multiple request transmissions in a connection. If Server

A request has been completed, but the next request of the customer program has not been received. The interval exceeds

After the value set for this parameter, ServerDisconnect.

MinSpareServers 5 MaxSpareServers 10

In the Web ServerBecause the sub-process must be generated first to process the customer's request, the response time is a little delayed. However, Apache ServerA special technique is used to get rid of this problem. This means that multiple idle sub-processes are generated in advance and reside in the system. Once a request occurs, immediately use these idle sub-processes for processing, so that there is no latency caused by the generation of sub-processes. As client requests increase, the number of sub-processes started increases. ServerAfter an HTTP request is processed, the copy does not exit immediately, but stays in the computer waiting for the next request. However, the number of idle sub-process Replicas cannot be increased or decreased, and too many idle sub-processes are not processed or occupied. ServerTherefore, we need to limit the number of spare copies to maintain an appropriate number, so that we can respond to customer requests in a timely manner and reduce the number of unnecessary processes.

Therefore, you can use the MinSpareServers parameter to set the minimum number of idle sub-processes and

Use the MaxSpareServers parameter to limit the maximum number of idle sub-processes, redundant ServerProcess Deputy

It will quit. According ServerIf ServerHigh Performance and

If these parameters are frequently accessed, you must increase the settings of these two parameters. For high-load professional websites, these two values

It should be roughly the same and equivalent to the most supported by the system ServerNumber of replicas and unnecessary replicas

Log out.

StartServers 5

The StartServers parameter is used to set the number of subprocess replicas started at httpd startup. this parameter is related to the MinSpareServers and MaxSpareServers parameters defined above and is used to start idle sub-processes to increase ServerResponse speed. This parameter should be set to a value between the first two values, which is less than MinSpareServers and greater than MaxS pareServers.

MaxClients 150

On the other hand, ServerAfter all, the capability is limited, and it is impossible to process unlimited connections at the same time.

Therefore, the Maxclient s parameter is used to specify ServerThe maximum number of customers that support concurrent access. If this value is too large, the system has to switch between too many processes during busy hours to serve too many customers, this slows down the response to each customer and reduces the overall efficiency. If this value is set to a small value, some customer connection requests will be rejected when the system is busy. When ServerWhen the performance is high, you can add the setting of this value as appropriate. Professional websites should be improved ServerTherefore, this parameter cannot exceed the limits of the hardware. If access is denied frequently, it indicates that the hardware needs to be upgraded. ServerHardware. For non-professional websites, users are not very concerned about the response speed to the customer's browser, or think that the response speed is slower than that of the rejected connection. This parameter can also be set slightly beyond the hardware conditions.

This parameter limits the settings of MinSpareServers and MaxSpareServers.

.

MaxRequestsPerChild 30

A sub-process is a commonly used method for providing Web services. A sub-process is a connection service, the problem is that each connection requires system operations to generate and exit sub-processes, so that these additional processes occupy a large amount of processing capabilities of the computer. Therefore, the best way is that a sub-process can connect to the service for multiple times, so that the system consumption of the generated and exited processes is not required. Apache uses this method. After a connection is completed, the sub-process does not exit, but stays in the system waiting for the next service request, which greatly improves the performance.

However, due to the constant application and release of memory by the neutron process during the processing process, an increase in the number of times will cause

Some memory spam will affect the system stability and the effective use of system resources. Therefore, after a replica processes requests for a certain number of times, the child process can be exited and then exited from the original

Re-copy a clean copy in the httpd process to improve system stability. In this way, each

The number of service requests processed by sub-processes is defined by MaxRe questPerChild. The default value is 30,

This value is too conservative for Linux systems with high stability. It can be set to 1000 or higher, and 0 to support unlimited service processing for each copy.

# Listen 3000.

# Listen 12.34.56.78: 80

# BindAddress *

The Listen parameter can be specified. ServerIn addition to monitoring the Standard port 80, it also monitors

HTTP request. Because the FreeBSD system can have multiple IP addresses at the same time, you can also specify ServerOnly listen to HTTP requests for a BindAddress </B> ip address. If no ConfigurationThis item ServerWill respond to requests to all IP addresses.

Even if the BindAddress parameter is used ServerThe HTTP daemon can only respond to requests from one IP address. However, by using the extended Listen parameter, the HTTP daemon can still respond to requests from other IP addresses. In this case, the Listen parameter is used in the same way as the second example above. This complex usage is mainly used to set up virtual hosts. The VirtualHost parameter can be used to define virtual hosts with different IP addresses. However, this method is used to set virtual hosts in the earlier HTTP 1.0 standard. Each virtual host requires an IP address, in fact, it is not very useful. In HTTP 1.1, the support for single-IP multi-domain virtual hosts is added, making the virtual host settings more meaningful.

LoadModule mime_magic_module libexec/apache/mod_mime_magic.so

LoadModule info_module libexec/apache/mod_info.so

LoadModule speling_module libexec/apache/mod_speling.so

LoadModule proxy_module libexec/apache/libproxy. so

LoadModule rewrite_module libexec/apache/mod_rewrite.so

LoadModule anon_auth_module libexec/apache/mod_auth_anon.so

LoadModule db_auth_module libexec/apache/mod_auth_db.so

LoadModule digest_module libexec/apache/mod_digest.so

LoadModule cern_meta_module libexec/apache/mod_cern_meta.so

LoadModule expires_module libexec/apache/mod_expires.so

LoadModule headers_module libexec/apache/mod_headers.so

LoadModule usertrack_module libexec/apache/mod_usertrack.so

LoadModule unique_id_module libexec/apache/mod_unique_id.so

ClearModuleList

AddModule mod_env.c

AddModule mod_log_config.c

AddModule mod_mime_magic.c

AddModule mod_mime.c

AddModule mod_negotiation.c

AddModule mod_status.c

AddModule mod_info.c

AddModule mod_include.c

AddModule mod_autoindex.c

AddModule mod_dir.c

AddModule mod_cgi.c

AddModule mod_asis.c

AddModule mod_imap.c

AddModule mod_actions.c

AddModule mod_speling.c

AddModule mod_userdir.c

AddModule mod_proxy.c

AddModule mod_alias.c

AddModule mod_rewrite.c

AddModule mod_access.c

AddModule mod_auth.c

AddModule mod_auth_anon.c

AddModule mod_auth_db.c

AddModule mod_digest.c

AddModule mod_cern_meta.c

AddModule mod_expires.c

AddModule mod_headers.c

AddModule mod_usertrack.c

AddModule mod_unique_id.c

AddModule mod_so.c

AddModule mod_setenvif.c

Apache ServerIts Modular structure is an important feature

New functions can be added through the new module during translation. It also shows that the module can dynamically load http service processes.

It does not need to load unnecessary modules. To use the Dynamic loading Module of Apache, you only need to set the Load Module and AddModule parameters. This feature is the DSO (Dynamic Shared Object) feature of Apache, however, it is still not a simple task to make full use of the DSO feature. Modifying the settings here may cause ServerCannot start normally. Therefore, if you do not want to increase or decrease ServerDo not change the settings here.

The above list shows the default Apache in Linux ServerSupported modules are actually very

Multi-module is unnecessary, and unnecessary modules are not loaded into the memory. The module can be statically connected to Apache ServerIt can also be dynamically loaded internally to compile all Apache features into a dynamic and load-able module, which is the Port method rather than the default approach of Apache, in this way, at the expense of a small amount of performance, it brings great flexibility.

Therefore, the ability to dynamically load has a slight impact on the performance. Therefore, you can re-compile Apache and compile the required functions into Apache. ServerInternal, it can make the system look cleaner, and the efficiency is also slightly improved. It is not necessary to recompile Apache for this purpose only. If you need to add other features and re-compile Apache, add other modules and statically connect all modules to Apache Server. Some users prefer Dynamic Loading modules.

These modules are stored in the/usr/local/apache/libexec/directory. Each module corresponds Server. A detailed explanation of the functions of each module requires a considerable amount of space. The more important features will be explained in the following sections, for specific functions and usage of each module, You need to view the Apache documentation.

# ExtendedStatus On

Apache ServerYou can use special HTTP requests to report the running status.

The ExtendedStatus parameter allows ServerReport more comprehensive running status information.
Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.