Create a vista style button Template

The buttons in the user interface of Vista have a very unique appearance. With the gradient and service effect, writing this style will be helpful. You can create a button style and provide a simple way to change the background color that is just the foundation, to create buttons of different colors, such:

This roaming will provide a complete guide to create a general template for this type of Button design. First, the Microsoft express design of the shipping version and the following line!

 

1. Create a new file with a size of 200x200. Set the zoom level to 400 or 800%.

2. Double-click the name first layer in the layer palette (Layer 1) and rename it as the corresponding color. This is the color used to hold the base layer. Later, you only need to change the color of this layer to change the background button.

3. Draw a rectangular button outline and rounded corner. Make the platinum height around 51 angle width x 41. These are optional layers. If you cannot enter the exact size for the first time, you need to click the icon in the center of the small chain:

This will let you disconnect the level slider. Now you can enter the size you want:

4. Give it a rounded 4pt.

5. Give it a solid fill color like red (#5f1907)

6. Purchased solid black stroke boundary 2px wide

The rectangle should look like this:

Note:
If you find that the rectangle looks too small to see and work comfortably, you can zoom in easily. To do this, click the zoom button, which looks like a magnifier toolbox:

Then, you only need to add the strict cables to the rectangle:

Let's zoom in with artbox based on your previous selections
7. Copy the rectangle (click to clipboard ). To do this, highlight the rectangular layer and press Ctrl C to copy to the clipboard.

8. Add a new layer for the effect of Vista. This is the color layer at the top of the stack base. Use the layer palette in the lower right corner of the new layer button:

9. Rename the effect of the Vista button layer. Press enter to rename

10. Although Vista's button effect layer emphasizes pressing ctrl f to the layer before the rectangle is pasted (100% opacity)

11. Stroke thickness 1px and stroke opacity = 83%

If both opacity and stroke opacity then disconnect these changes and then set stroke opacity = 83%

12. Now click Enter label

13. Click the gradient color palette (bottom left ):

At this point, you should add a gradient fill white (255255255) Background and stop as shown in.
When you click the gradient fill button for the first time, you will see this setting:

14. Create a 0% RGB color that stays at 71% (255,255,255 stop alpha. You only need to change the leftmost stop mark by default:

15. Now, click the icon around 48% in the Middle East to add a new stop to stop Alpha at 0%:

16. Change stop at rightmost (100%) to 67% stop Alpha also use white (255255255 ):

17. The current midpoint (the top and left and middle of the tick logo need to be dragged to the center:

18. Drag the sign about 57% in the upper right corner of the second vertex:

The gradient at this point looks like this:

The current button should look as follows:

Gradients are the way to point out errors so that we can change this vertical gradient.
19. Click the gradient conversion tool from the Toolbox palette:

20. Drag the button above the mouse to the bottom of the Middle East implementation, and hold the Shift key to get a straight line:

When you make your gradient complete its new direction:

21. The time is used to copy the rectangle once. Click the effect of the latest rectangle on the Vista button layer to highlight it:

22. Press ctrl C to copy the rectangle to the clipboard, and then press Ctrl F to the front of a new copy to be pasted:

23. Make sure to adjust the selection of your selection tool before:

24. The size of the new rectangle is a little small while keeping its rounded corner. Hold down the Alt key and shift key while dragging the lower right corner until the inner rectangle looks like this:

25. The inner rectangle must have an appropriate arc radius of the blade tip. You can try 3:

26. Set the rectangle without entering it

27. Now switch to the stroke label and give it a thickness of 2px and stroke opacity = 53% (color = 255255255)
28. First disconnect the fill and stroke opacity slider:

29. Then turbidity to 53%:

30. Current color stroke White (255255255 ):

The button now looks like this:

31. Select the two Vista effect Rectangles and group them together.

Finally:

32. At this point, if you have a graphic button you want to add, create a new level and the purchased image. Make sure that the layer stack above the layer is:

This may look like this:

Let's create a button base like a font, such as a media player with a simple stop button.
33. Create a new layer and drag it to the top layer stack. Rename it as the stop button-White:

34. Click this layer to select it and draw a rectangle rounded corner with two corners:

35. Fill in the stroke White (255255255) and the thickness 1pt:

36. Change the fill label and give it a fill white (255255255) at 100% opacity:

The stop button should look as follows:

We need to stop the button base of the font center, and it takes a small action.
37. Drag the rectangle (16 points) from the stop button-the white layer is only below the baseline color rectangle:

38. Now select the base color rectangle and the shift key of the stop button rectangle and click two slices:

39. Currently, the adjusted center objects do the following:

Now you will see this:

The stop font is now fully concentrated.
40. You need to drag the rectangular backup to stop its layer again:

 

Ended: