Kali Linux + WINDOWS10 dual system Installation Tutorial

0x01 preparatory work

Prepare Tools:

1.kali2.0 image file-: https://www.kali.org/downloads/

2. Soft Disc Pass (UltraISO) -: https://cn.ultraiso.net/xiazai.html

3. Partition helper-This is to partition an installed disk for the Kali, if the partition has been partitioned can omit this step

4.EASYBCD(Production boot tool)-: http://mydown.yesky.com/pcsoft/416109.html

5.U disk (greater than 4GB, preferably 8GB)-here is the need to make a Kali installation boot disk, the USB drive is too small to load Kali installation program

To make a startup disk:
1. Plug your USB drive larger than 4G into the dongle, the USB drive best supports USB3.0, which can speed up the data transfer.
2. Open the soft disk pass (ultraiso) and click Open in the file directory to load the downloaded Kali image file.
3. Point out startup options, select "Write to Hard disk image"
4. Hard drive Select your USB stick, (usually the default is a USB flash drive), confirm the choice is a USB flash drive, first click on the format , after the format is finished, click "Write", and then wait for a period of time to write the process, when the progress bar read, the installation of the startup USB stick is done.

Partition:

1. Partition tool to divide a partition of about 20GB, the new division of this area is the Kali system installation area

2. Find a free partition without important data directly formatted (do not choose C, do not choose c, do not choose c , the important thing to say three times)

0X02 Installation System

After inserting the prepared Setup boot disk into the computer,

In the BIOS settings select USB boot (here because different computer methods, not much to do description, I Lenovo X250 is the carriage return +F1 into the BIOS setup)

Then wait for the installer to load the Kali Linux

Here we choose the Graphical Install option (graphical installation), of course, if you are familiar with Kali Linux, you can choose the install directly

There is a hint that the disc cannot be mounted

This problem occurs because the installation program does not load the USB stick program, the solution is to unplug the USB drive and then plug it in again.
Prompt for missing network device firmware (no prompts to skip)
  This problem occurs because the NIC driver does not have a default installation, which causes the NIC to not be used during the installation step, select No, and then select the option to temporarily not load the driver
disk partitioning step [ important "
Select Manual when selecting disk options
Here directly select the partition where the installation Kali is divided, Remember the partition number , Select the partition and click Continue
Then set up our partition: for option Select "EXT4 log File System", "mount point" select "/" (root directory) , select "Partition set End" to continue after setting is complete.
then prompt whether to return to the Partition menu, select No
to prompt for changes to disk, select Yes, and then start installing the system

network Image selection No, I don't know why, anyway, it's not going to go wrong ( I have previously chosen to discover that there is no use for eggs.
write boot

prompt to select" Manual input "when installing the device of the bootloader.
The following is entered in the:/dev/sda9   after this number 9 is mentioned earlier the number of the partition you selected, the author of the number is 9, according to the number I have just written down
installation completed, restart the computer

0x03 add boot
with Kali turned on, it is normal for this to happen if you enter or Windows system. Because we haven't added Kali to boot yet.
  Open EasyBCD, in: New Add Entry "Select the" Linux/bsd "entry, the type is unchanged, the name is changed to Kali Linux, the drive chooses to install the Kali partition (here the number of partitions, and the number of the installation system is not the same, Can be judged based on the size of the partition), then click Add Entry.
and then to" Advanced Settings "Select the drive you just created, select" Drive "to boot and save.

0x04 into the second system After the
reboot (there is no need to enter the BIOS settings, direct restart on the line, waiting for the Windows boot interface), you will find that there are two options, select the Kali Linux system, and then you can enter the second system we installed

0x05 System setup after installation is complete

Reference this blog post: http://www.cnblogs.com/superye/p/7277699.html

Note: This picture and some of the data quoted from-http://blog.sina.com.cn/s/blog_8c8d4e710102wggl.html

Kali Linux + WINDOWS10 dual system Installation Tutorial