RouterOS Installation Detailed Tutorial

, Installation RouterOS
Start with the RouterOS disc, select the function according to your needs, or press "a" to install all, then press "I", this time will ask you whether to keep the previous settings, we press "n" Cancel, start a new installation.

2, set the local network card name and IP
The first start is the text interface, in the input username "Admin", prompted to enter the password, the first time the password is empty, direct return into the RouterOS text operation interface.
input int into the NIC settings interface, enter print to see if the network card has been found, we need to confirm that is connected to the intranet, if the first one, we enter:
En0
Set 0 Name=lan
Then enter the carriage, this step can be skipped, just in order to set the intranet IP address conveniently.
Enter "/", then return to the root directory, then enter "Setup", return, enter the Settings page.
Here will provide you with a list of for example, enter "a", enter the IP and gateway settings, input "R", will remove all configuration, that is, hard routing hard reset, enter "s", into the set DHCP page, we only need to set up the network card IP can, so enter "a", return.
And then there's a list of features, and we're going to type "a" again.
At this point you are prompted to set which network card IP, if you find that the network card name is not the "LAN" We just set, we use the BACKSPACE key to clear, and input "LAN", enter.
At this point you are prompted to enter IP and mask, we enter: 192.168.0.1/24 (here in accordance with the need to set intranet IP)
You will be prompted if you are setting the default gateway, we Press "G" and then enter the following: 0.0.0.0
Enter "X" to exit the network card settings, when we end the text mode operation of the host.

3, set PPPoE dial-up Internet access mode
Connect the switch to the NIC that you just named "LAN" In other computers input: 192.168.0.1 into the RouterOS Web interface, we only need to download the Winbox on the homepage of the software can be, if not landing 192.168.0.1, check the operation of the computer IP is in the network segment.
Run the download Winbox, enter the username admin, password empty, entered a very detailed settings interface, click on the left of the first interfaces, you can see all the network card working status, you can modify the name of each network card.
Point to the left of the PPP, and then Point +, select PPPoE Client, in the general label card, name can be any one, such as Adsl,interface must choose you to connect the net, that is, the Moden card, click Dial out tag card, In username and password input ADSL account number and password, others do not lose, press OK to save exit.
Click on the left side of the Ip–firewall, in the window out of the NAT tag card, point + Add a new record, in the window, nothing else to change, directly click on the Action tab, select Masquerade in action, and then click OK to save exit.
So we can surf the Internet.

4. New DHCP server
Click on the left Ip–pool, point + Create a new address pool, name default pool1 can be, address fill: 192.168.0.2-192.168.0.254, click OK to complete Add.
Click Ip–dhcp Server, click the Networks tab in the new window, click + New DHCP Configuration
Address:192.168.0.0/24
gateway:192.168.0.1
DNS servers:60.191.134.196
Click OK to complete add, then Point DHCP tab, click + New DHCP service
Name:server1
Interface:lan
Address Pool:pool1
Click OK to complete the add

4. Set wireless network card as wireless AP
First in the interface should be able to find and correctly identify your wireless network card model, or you can not continue
Click on the wireless on the left, click Security Profiles in the window, and click on the new secure authentication profile.
Name:wpa2-psk
mode:dynamic keys
Authentication Types:wpa PSK WPA2 PSK (Here we can choose more, I chose 2)
Unicast Ciphers:tkip
Group Ciphers:tkip
WPA pre-shared key: your wireless access password
WPA2 pre-shared Key: your wireless access password
Click OK to complete the add
Click on the Interfaces tab and double-click your wireless card
In the General label card, Name:wlan
In the wireless tag card,
Mode:ap Bridge
Ssid:wifi_name (your own favorite wireless node name)
band:2.4ghz-b/g (54MB Select this)
frequency:2412
Security Profile:wpa2-psk (here is the secure authentication configuration file that you just established, choose Default is no password required)
Frequency Mode:superchannel
Country:china
Click OK to complete the add

The wireless card also needs to establish a DHCP server, in the same way as the fourth step, but the network segment needs to change