U-Hero makes U disk Startup Disk FAQ Summary

Nowadays, the use of U disk installation system is a mainstream installed mode. U-Disk installation system than the traditional CD-ROM system more convenient, simple, but also a large number of installed people's preferred. Use a U disk installation system has a prerequisite, that is, you need to make U disk to set up the disk to install the system. Here small set to everyone recommend a [u warrior U-start production tools], with u to achieve a key to create a U disk Startup disk, a key installed, just a few minutes to fix the system installation.

However, there are many users in the process of making U disk Startup disk, often encounter a variety of problems, therefore, today small set up a copy of the U heroes to make a U disk Startup Disk FAQ summary.

　　1. What is the system of the U-warrior outfit?

U Warrior System is a only need one step can make your U disk as with WinPE system.

"The operation process is only to select your U disk letter, click Start production can be"

　　2. What are the characteristics of the U-Warrior system?

1 You can do the same as usual on the U disk File save, edit, format, anti-virus and other work

2 hidden partitions Let your USB disk can help you or your friends to repair the computer anytime, even if others use also don't worry about the virus.

3 using the USB drive he made can run on any computer.

　　3. What kind of mobile devices is the system supported by U warrior?

Current support: U disk, memory card, Mp3/mp4, such as mobile storage devices [mobile hard disk]

　　4, U Hero Pack system support how big u disk?

Support 256MB and above all capacity, maximum up to 2TB)

　　5. How to use U Warrior

Note: Please back up your data before use, otherwise u disk format will cause data loss.

　　6, why my U warrior run unsuccessful?

Required Conditions:

1 when running, require the user to have administrator's permission namely Administrator2

2 your U disk capacity is too small

3 When running the software, you need to quit all anti-virus tools to prevent U disk Startup Disk production failure.

4 Please make sure that your USB disk has been produced, if quantity has been produced, please restore the amount of postpartum use.

　　7, why do I go into PE can not install the system?

Please make sure that your system Ghost file exists and can be used, and that the file is stored in the correct location.

　　8, when the use of a U disk after the space restore how to do?

Please go to U warrior to start making tool interface, on your U disk to "Return U disk space."

　　9. What tools are there in the WinPE of the U-Heroes?

Basic disk repair, data recovery, System Restore, disk detection, memory detection and other tools, and constantly in the perfect.

　　10. How long does WinPE enter the waiting time?

No longer than 5 minutes, this is based on your memory and USB interface to determine.

　　11, I made a successful, how to set up a U disk boot system?

The best way to find your motherboard is to use the manual, of course, we also published a part of the official BIOS setup method. (various motherboards Enter the BIOS setup graphics and text tutorial http://www.udaxia.com/upqd/22.html)

　　12, I use U to install the system encountered problems how to do?

You can directly join the official group of the U, find management solutions. U Heroes Official Group ①:376387102 U Official Group ②:u Official Group ②

　　13, with the U-pack system made a good u disk can be used in another computer

You can use the U-hero to make a good U disk could be used on any computer can be free to start without making again.

　　14, the volume of the U disk use U Warrior system has what attention?

Volume-Produced U disk use U Warrior system when you select the second (not CDROM) partition, your USB disk will support Usb-cdrom, USB-HDD or Usb-zip, three modes to start. Volume-produced U disk and then use the U-pack system, compatibility may be reduced. Recommended that you use the production tool to restore the U disk to the normal state that is to remove the USB cdrom, and then the U-mount system USB disk compatibility will be greatly improved.

　　15, why in PE can not find my u disk or mobile hard disk

You can insert a removable hard drive before the WinPE is turned off and if it is not recognized after booting, you go to Disk Management to specify the move letter.

　　16, with U Warrior system pe can not enter?

WinPE Unable to enter reason description:

1 You may be in other sites to download the U disk installation System Tools, please go to your official website to download the latest U Heroes USB disk start production tools.

2 PE requires that your memory capacity is at least greater than 256mb!

　　17, with the U-pack system prompts the success of the production but the U disk inside empty?

U Master System Tools using the latest technology will make a good U disk system partition hidden, you see the visible partition inside the data. So don't worry you can format the visible partition, storage data, and so on, really do the boot U disk never virus, you can easily carry the function.

　　18, with U heroes to create a U disk Startup disk, you can still use the same as normal?

OK, normal use.

　　19, after the completion of the production, open U disk prompt format?

You can try pulling out the U plate and making it again.

　　20, with the U-Hero production tools, the production of a good future can also use it?

U disk automatically reduce the space of about 100 m as the starting mirror, and automatically hide, to prevent virus damage, the remaining U disk space can be used normally.

　　21, with the U-Hero production tools, support the mobile hard drive?

Can be made, but will default to a partition, finished to repartition.

　　22. How do I start the mobile hard drive?

If important data is backed up in the removable hard drive because you will be able to erase all the contents of the hard drive. Then install the U Warrior Startup disk. Finally rebuild the partition table or copy the important data back to the mobile hard drive, and there are several partitions on the hard drive. When you make a startup disk with the U Warrior, the partitions are merged.

　　23, U Hero USB disk installation system Restart Flash can not install prompts how to do?

Use the start U disk made by you to enter the WinPE system and activate the hard disk partition of the installed system through the Diskgenius partition tool.

　　24, U warrior into PE after the use of C disk letter how to solve?

1 in the U-disk new txt text document, and then enter the following two lines of characters in the document; (right red word is annotation, no input required)

SUBJ%curdrv%//Delete the original USB disk letter

Show R:1,u//u disk new allocation letter for u:

2 Rename the text document to "Changeusb.ini" (the suffix must be. INI),

3 Open My Computer under the PE system, locate and open the Pecmd.ini file (this profile can usually be found in the SYSTEM32 folder). Add a line of the load command to the command statement and automatically load the "Changeusb.ini" file you have built in the U disk by using the leader of the load command. With the command:

The load directory Changeusb.ini, where the directory represents the storage path of the Changeusb.ini file, which is stored directly on the U disk instead of in a folder on the U disk, so the command entered is: Load removable disk (G:) Changeusb.ini!