Four measures to improve wireless network performance

Wireless Internet presence is a problem of signal strength, when wireless internet nodes or wireless router devices placed in different locations in the Wireless LAN, wireless internet signal intensity will also be different, then the efficiency of wireless Internet is naturally not the same. In order to improve the efficiency of wireless Internet, the following measures are worth a try!

Configure wireless devices according to user distribution

Generally speaking, wireless internet node or wireless router device has a certain limit on the number of users access, if too many wireless Internet users to access wireless devices, then the performance of wireless devices will be seriously affected, At this time, access to the same wireless internet access devices of all client systems, can not be highly efficient access to the Wireless LAN network. For this reason, before placing wireless internet nodes or wireless router devices, we should make a rough estimate of the number of users of wireless Internet access, and ensure that many wireless internet users can be evenly connected to different wireless access devices. Make sure each one of them is able to surf the internet efficiently and wirelessly.

To adjust the antenna position to promote network performance

Normally, wireless internet nodes or wireless router devices will be attached to the Internet antenna, and different models of equipment with the antenna is different, then the installation and commissioning of the antenna location to choose natural is not the same. In addition, if we choose the Wireless network node or wireless router device antenna can be replaced, then we can also by replacing the antenna or using the way to add feeder, to focus on wireless internet equipment, while adjusting the length of the feeder to achieve the indirect adjustment of the wireless network antenna position, This will increase the flexibility of placing wireless internet devices. However, we need to remind you that, considering the wireless internet node or wireless router device feeder length If too long, the same will affect the performance of wireless Internet access, so in the future when we use the antenna feeder, we also need to properly control the length of the wireless equipment feeder.

Wireless devices are placed according to the Internet environment

Wireless internet signal in the transmission process, very vulnerable to the "block" around the barrier, while the wireless internet signal was "blocked" the number of times, then the internet signal attenuation amplitude is greater. When the wireless Internet environment contains a lot of obstacles are metal objects, then the wireless internet efficiency of the client system will be seriously affected, because the metal barrier not only to the wireless internet signal transmission path to "block", but also it can directly wireless internet signal in the transmission process generated by the electromagnetic energy to be absorbed out, At the same time, the automatic generation of weak current outward directly out, so the wireless internet signal once by the metal barrier "block", the internet signal may be directly attenuated to zero.

Typically, wireless internet nodes or wireless router devices have a signal coverage of about 300 feet, and if we are placing the device,If there are any obstructions near the wireless internet environment, the wireless signal coverage will be reduced; Considering that the antennas used by wireless internet nodes or wireless router devices are always in full direction and can transmit and broadcast wireless signals within a 360-degree range, we should try to place the wireless devices in the center of the local area network. At the same time make sure that the location can not have too many obstacles. Of course, a lot of wireless internet environment in the client system may be scattered in a number of different rooms, this time when we put wireless internet nodes or wireless router devices, we may try to place it directly in a number of different rooms at the intersection of places, It is believed that all the client systems located in different rooms can get the ideal wireless internet signal.

excluding external interference to improve network performance

Wireless internet signal in the transmission process, but also vulnerable to other radio emission signal interference, especially from the use of wireless internet nodes or wireless routers in the same band of equipment interference, So before placing wireless internet nodes or wireless router devices, it is necessary for us to carry out a signal interference environment assessment for all places that may need wireless internet access, to confirm whether there is a signal interference source nearby. If there is a wireless signal interference source, then we in the display of wireless internet equipment, we must try to avoid signal interference or early removal of signal interference sources.

Wireless internet node or wireless router device there is a strong electric field or strong magnetic field, we should find ways to remove these strong electric or strong magnetic field emission source in time to ensure that wireless internet signal can be in a relatively stable network environment for transmission. If you encounter a wireless internet equipment working frequency and other signal source of the same work frequency of the same special phenomenon, we can try to log into the wireless network node or wireless router device background management system, and in which the appropriate adjustment of their operating frequency, in order to eliminate other signal source to its interference.