From the route when the switch is used!

Set up:

1. Connect the computer to the LAN port of the router, and change the IP address from routed to another network segment address as long as it is not the same segment as the primary router. For example, most of the router address is 192.168.1.1, we just change from a router address to 192.168.0.1 can;

2. Again in the settings will be from the router's DHCP function off;

3. Finally, connect the main router's network cable to the LAN port from the router (whichever is the same), must be bridged together LAN ports, if the LAN port is not enough, you can set the following in Network >> switch:

From the route when the switch is used!