Full PPPOE server settings

We are no stranger to the PPPoE protocol. How can we build a PPPoE server? Here we will explain it in detail. Based on the Setup steps we have summarized, we hope that you can understand this process. Now let's take a look at the specific setting process based on the graphic explanation.

Click PPP in the menu to go out of the PPP settings page. This is where the PPPOE server is set. Next Step

Click the PPPoE Servers tab and click + to jump out of the page to configure the server. For details, see the illustration. Next step

After completing the above steps, we will first create an IP address pool for the PPPOE server. The address pool is used to automatically obtain the IP address from the pool when the following customers dial up, so you can set a class C segment here, for details, see the illustration. Next step

Click PPP in the menu to jump out of the Setting PPP settings page, click the tag Profiles, set parameters according to the illustration, and next step

In this step, create a user account, click the tag Secrets, click + to go out of the settings page, and set the user name, password, and PPPOE service as shown in the figure. After confirmation, the user account is created, here, the PPPOE server in the route has been established, and now you can use the PPPOE dialing software on the client. If the connection is successful, congratulations, your server has been established successfully.