g40-70,g50-70 Lenovo small New notebook SR1000 random Linux change Win7 system

Source: Internet
Author: User
Tags lenovo

Scope of application:

g40-70,g50-70 Lenovo small New notebook sr1000,linux change Win7

  Knowledge Point Analysis:

This is changed for Windows 8 Windows 7, but because of the frequent use of ghost and PE, it is necessary to change the GPT to MBR, or it may cause the hard drive to be unrecognized.

  Operation Steps:

Note: Because the computer factory using the hard disk is GPT partition format, so if the use of Ghost and PE, is not recognized to the hard disk, this is the normal situation, replace the installation version can be.

Prior to modification: If you are sure that you want to retrofit your laptop's Linux system into a Windows 7 system, please note the following important points:

Because of the Linux system you have installed on your notebook, the settings for your notebook are set by reference to the Windows 8 system, so if you need to install Windows 8 system, then you can install Windows 8 after you have directly backed up your critical data. However, if you need to install a Windows 7 system, the UEFI feature in the BIOS and the GPT partition table need to be changed, so when you convert your system to a Windows 7 system, you need to remove all the partitions from the random Linux system. Because these partitions are created under a GPT partition table, Windows 7 uses an MBR partition table that is incompatible. So when you put your notebook on the other system, you can't install it properly. So please backup all the important data in your notebook hard disk to Removable storage media (such as U disk, mobile hard disk, etc.) before the operation of the Linux system which is installed in your notebook to be retrofitted to Windows 7 system. In order to ensure a smooth installation of the system, we strongly recommend that you use the genuine Windows 7 operating system CD (if your notebook does not have an optical drive, we strongly recommend that you use a USB drive to complete the operation). Do not use the ghost version of Windows 7 or other non-genuine Windows 7 operating system CDs. Otherwise, you will not be able to operate. The main reason is also related to the partitioning method described in the first article.

 One, the BIOS adjusts the method

1. First change the BIOS settings, computer shutdown state under the notebook left charge interface of a small button (or at the same time press the keyboard fn+f2 will directly enter the BIOS interface), will appear as shown:

  Select the second BIOS Setup option and then enter the BIOS interface.

2. After entering the BIOS setup interface, press the "→" key on the keyboard to move the menu to the "EXIT" item, press the "↓" button on the keyboard to select the "OS optimized Defaults" option, press the "Enter" button to open the option Settings menu, press the keyboard "↓" button, After modifying the default "Win8 64bit" to "others", press the "Enter" key to confirm. Then press the "↑" button on the keyboard to select the "Load default Setting" option, press ENTER to start the Restore BIOS Default feature window, in which you press the "enter" key on the notebook keyboard to start the BIOS restore default function. Then press the "FN" + "F10" key on the notebook keyboard to start the BIOS Save Settings window, where you can press the "enter" key on the notebook keyboard to start the BIOS save settings and restart the computer.

3. When the computer restarts to "Lenovo" logo screen, and press the notebook keyboard "fn key +" "F2" key into the notebook BIOS setup interface

(or if you press the laptop power switch off the computer when the computer restarts to the "Lenovo" logo screen, press "One key Restore button" power on, press "↓" button on the keyboard select the "BIOS Setup" item in the boot menu and press "Enter" button to enter the boot setup interface. Press the "→" key menu on the keyboard to move to the "Boot" item, locate the "Boot mode" option under the item, press "Enter" to open the settings menu for the option, press the "↓" button on the keyboard, change the default "UEFI" to "Legacy Support" and press " Enter "key confirmation, and then press the" ↓ "button on the keyboard to select" Boot Priority "option, press the" ↓ "button on the keyboard to change the default" UEFI a "to" Legacy "and press" enter "to confirm. Then press the "FN" + "F10" key on the notebook keyboard to start the BIOS Save Settings window, where you can press the "enter" key on the notebook keyboard to start the BIOS save settings and restart the computer function.

4. When the computer restarts to the "Lenovo" logo screen, and press the "FN key +" F12 "button on the notebook keyboard to enter the boot setting interface of the notebook (or, after the computer restarts to the" Lenovo "logo screen, press the notebook's power switch to turn off the computer, press" One-click Restore Button "on the boot, press the" ↓ "key on the keyboard select the Boot menu item in the Startup menus and press" enter "to enter the boot setup interface. Eject the CD drive tray in your notebook at this time, push the CD-ROM drive tray back after placing the original Windows 7 operating system CD and select "SATA ODD" in the interface (the installation system is using the optical drive) or "USB ODD" (using an external USB disk to install the system) and press "Enter "Key to implement boot boot.

  Second, as above for the BIOS adjustment method, the following is the system installation method

1. On the first screen of Windows 7 system installation, press the SHIFT key + "Fn" key + "F10" button on the keyboard. Start the CMD command line mode window;

2. In the CMD Command Line window directly enter the "DiskPart" command, and then press "enter" key, will automatically enter the DiskPart mode;

3. Enter the DiskPart mode, and then enter the "list Disk" command and press "enter" key to confirm the number of hard disk in your notebook and location, the following figure in the notebook only a hard drive;

4. Enter the "select Disk 0" command and press "enter" key to select the hard drive in your notebook;

5. Enter the "clean" command and press "enter" key to remove all the partitions and data in your notebook's hard drive;

6. Enter the "convert MBR" command and press the "enter" key to convert the split mode of your notebook's hard disk from GPT mode to MBR mode;

7. Enter the "Exit" command and press "enter" key to exit the DiskPart mode, and then again "exit" command and press "enter" key exit, exit cmd command line mode;

8. After the operation is completed, please click the "Red Fork" in the upper right corner of the Windows 7 system Installation's first screen window. Then select "Yes" in the pop-up window to restart your notebook, when the computer restarts to the "Lenovo" logo screen, and press the "FN key +" on the Notebook keyboard F12 "Key goes into the boot settings interface of the notebook (or if you press the laptop power switch off the computer when the computer restarts to the" Lenovo "logo screen, press the" One-click Restore Button "to power on, and enter the boot menu entry again by selecting the" Boot Menus "item in the boot. At this time the CD drive tray of your notebook eject, put into the genuine Windows 7 operating system after the CD-ROM drive tray back, and select the interface of the "SATA ODD" Item and press "Enter" key to achieve the CD-ROM drive boot.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.