General PE Toolbox Production method

Method One, install to this system

This method is to install the General PE Toolbox into the system, restart the computer, the computer selection interface will appear in the "Universal PE Toolbox" option, through this option to enter the WinPE system.

First, prepare

1. General PE Toolbox: You can download the latest General PE toolbox from the website.

Second, the operation

1. Run the generic PE toolbox just downloaded, click Next, as shown in figure:

2. Click the "Know" button directly, as shown in figure:

3. Check "Install to current system (recommended)", click "Select" button, as shown in figure:

4. Here you can set the relevant parameters, or you can not use the settings, click the "Install" button, as shown:

5. Wait for the installation to complete, as shown in figure:

6. After the installation completes, click the "Finish" button, as shown in figure:

7. Close all applications, restart the computer, in the Power-on selection screen, will appear the General PE toolbox options, select it can enter the PE interface, as shown:

Method Two, make start USB disk

This way is the General PE toolbox installed to U disk, will be made into a U disk to start a U disk, and then the U disk to start the computer into the PE system.

First, prepare

1. General PE Toolbox: You can download the latest General PE toolbox from the website.

2.U disk one.

Second, the operation

1. Run the generic PE toolbox just downloaded, click Next, as shown in figure: