Ghostsp3 SP3 flagship version V4 Installation Steps

Ghostsp3 SP3 flagship version V4 Installation Steps
If your computer starts the optical drive first, you can put the optical drive into the optical drive and restart it to automatically install it! Select the first partition to install! Try it. If it is not enabled on the CD, set it.
Set the optical drive, in this way, if the optical drive has a CD with the enabled function, it can be read before the hard disk is started (for example, when the system is installed from the CD ).
Setting method:
1. Start the computer and press DEL (some press F2) until the BIOS settings window appears (usually blue background, yellow English text ).
2. Select and enter the second item, "bios setup ). Find the items or groups that contain the BOOT text, and find the "FIRST", "SECEND", and "THIRD" in sequence, indicates "first start", "second start", and "third start" respectively ". Here we will set it to "Optical Drive", "soft drive", and "Hard Drive" in sequence. (If you do not see these three E files on this page, usually the option menu on the Right of BOOT is "SETUP". Press enter to enter.) You should select "FIRST" and press Enter, select CD-ROM from the sub-menu. Then press Enter.
3. after selecting the start mode, press the F10 key. In the E-text dialog box that appears, press the "Y" Key (which can be omitted) and press Enter. The computer restarts automatically to verify that the changed settings have taken effect.
The BIOS interface of each brand motherboard is different, but the basic purpose of the operation is to set the first boot item to the light boot. If you want to know the motherboard model, when you turn on the computer, when performing self-check, press and hold the pause break key, and you can see the model of the computer motherboard (including several major hardware information)