Gigabyte B85M-D3V Motherboard Mouse Failure solution

Gigabyte many new models motherboard installed XP system, there is a problem of mouse failure. In response to this problem, a lot of information, may be resolved by the following methods:

One: Bios modification method:

Take ga-b85m-d3v as an example to illustrate:

1, can be used, but need to set up in the BIOS.

2, specific as follows:

(1) in BIOS BIOS Features (BIOS function setting), set fast boot to: enabled;

(2) found below this page: USB support (USB device supported), change it to: Full Initial (all available)

(3) After saving the exit should be able to use.

If this method is used, then you can try the following methods:

Second: Remove the system USB device when the power saving shutdown

Open Device Manager and locate the Universal Serial Bus Controller:

650) this.width=650; "title=" 11.jpg "src=" http://s2.51cto.com/wyfs02/M01/7E/3F/wKiom1b6P_bArbUhAACXk26ARso283.jpg "alt=" Wkiom1b6p_barbuhaacxk26arso283.jpg "/>

Double-click the USB Root Hub to find power management and "V" to remove "allow the computer to turn off this device to save power".

650) this.width=650; "title=" 22.jpg "src=" http://s2.51cto.com/wyfs02/M00/7E/3B/wKioL1b6QGnTgTI4AABZBzxv8YE861.jpg "alt=" Wkiol1b6qgntgti4aabzbzxv8ye861.jpg "/>

If not, install Win7.

This article from "Guanlan computer | guanlan Computer Repair" blog, please be sure to keep this source http://guanlandiannao.blog.51cto.com/221600/1758100

Gigabyte B85M-D3V Motherboard Mouse Failure solution