Gionee E3 Mobile Network Unable to surf the internet

Fault overview

My wife this morning, said mobile card can not surf the internet, with WiFi can. Recently repaired once, is a setup problem.

Workaround

a ﹑ China Mobile WAP Settings:

Name: China MobileWAPSet
APN : cmwap (Unicom forUniwap,WCDMAto be 3gwap)
Agent: 10.0.0.172
Port: the

User name: None

Password: None

Server: None

Home Page wap.monternet.com

MMSC : None

MMS Agent: None

MMS Port: None

MMS Protocol:WAP 2.0
MCC : 460
MNC : Move isxxor Geneva, Unicom is 01
APN Type:default

Authentication type: None

Second, China Mobile Internet settings:

Name: China Mobile Internet settings

APN : cmnet ( unicom is uninet,WCDMA is 3gnet)

Agent: None

Port: None

User name: None

Password: None

Server: None

MMS Agent: None

MMS Port: None

MMS Protocol: WAP 2.0
MCC : 460
MNC : Move isxxor Geneva, Unicom is 01
APN Type:default

Authentication type: None

Third, China Mobile MMS settings:

name: China Mobile MMS Settings
    APN : cmwap   ( Unicom to uniwap WCDMA 3gwap)

Agent: 10.0.0.172

Port: the

User name: None

Password: None

Server: None
MMSC: http://mmsc.monternet.com (Unicom is//mmsc.myuni.com.cn)
MMS Agent: 10.0.0.172
MMS Port: 80
MCC : 460
MNC : 00
APN Type:MMS

Authentication type: None

Four, set up and then always press exit, return to the "Wireless Control" page, the sixth "mobile network" Tick! (Wait a little bit here) there may be no signal.

Five, finally, exit to the standby interface. Press "Phone" to enter Dial panel *#* #4636 #*#*,

1. Click "Mobile Info" to enter

2. Pull to the bottom click the Toggle DNS Check button in the lower left corner

Show 0.0.0.0 allowed next to the button return to standby desktop

No restart is required, and the E flag can be displayed