Glory Magic How to install SIM card? Glory Magic Sim Card method

It will be the end of this year,  has put a big move, launched the glorious Magic mobile phone. Presumably a lot of people have already started. The first thing to start with is to install a SIM card. So, how about the Glory Magic SIM card? Below, and small weave together to see the Glory Magic installed SIM card method.

First, Glory Magic Card information:

Network format

Network, the Glory Magic is a full netcom smartphone, and support dual-card double, while supporting Mobile, Unicom, telecom three major operators 4G+/4G/3G/2GB all networks, and also support VoLTE high-definition voice calls.

The following is the Glory Magic Network format details:

4G Network format: Support mobile 4G (tdd-lte)/Unicom 4G (tdd-lte/fdd-lte)/Telecom 4G (Tdd-lte/fdd-lte);

3G Network format: Support Mobile 3G (TD-SCDMA)/Unicom 3G (WCDMA)/Telecom 3G (CDMA2000);

2G Network format: Support mobile 2G (GSM)/Unicom 2G (GSM)/Telecom 2G (CDMA1X).

Note : Card slot 1, 2 can be arbitrarily switched to the main card, at the same time only one card Master card, the Deputy card can not use the same 2 card.

SIM card Type

Glory Magic a dual card slot design, dual card slot support are Nano-sim cards, also on the card slots 1 and 2 are the smallest size of the Mini card (Nano SIM card).

Nano-sim card is commonly known as Mini card, is a small size of the SIM card, mobile phone card before the need to prepare a Nano-sim card, if the hands of a standard SIM or micro SIM card, you need to cut cards or carry an identity card to the business hall to replace the mini card can be. Also have not understand friend, can read under "sim card and small card difference contrast.

Ii. Glory Magic Mounting method steps:

1, the first use of the box with the card needle, take out the glory of the magic fuselage at the bottom of the SIM card, the method is to use the needle inserted vertically into the bottom of the fuselage of the lower part of the SIM slot, a little pressure, you can eject the Cato, and then hand directly out the Cato

Glory Magic Cato is a combined design with an iron shell to securely install the SIM card, with the card type text hint on the Cato: SIM1 and SIM2, as shown in the picture.

2, will be ready for the Nano-sim card Tanka/or dual cards in the Cato, pay attention to the positive and negative design of Cato, insert a dual card to avoid inserting one. When inserting 2 SIM cards at the same time, SIM1 is the default data card. The Nano SIM card is then inserted into the Cato in 11 directions, noting the direction of the notch, as shown.

3, after the completion of the SIM card installation, and then Cartopine into the cell phone card slot (screen to avoid, SIM1 upward), as shown in the picture.

4, complete the above operation, you can turn on the normal use, if not an accident, the phone will be able to successfully identify the signal. If no SIM card is displayed, remove the card slot and check to see if the SIM card is properly installed and try again.

The above is the glorious Magic Loading card tutorial, this machine in the SIM card design and our common smartphone is different, first SIM card is located at the bottom of the fuselage, rather than the common fuselage to the left or the right side, the other double SIM card design, rather than the common parallel adjacent design, so the first card needs special attention.