GNS Frame Relay configuration and Frame Relay environment setup

GNS Frame Relay configuration and Frame Relay environment setup
To build the network environment as shown in, we use the GNS simulator to build
Step 1:
Step 2: configure the frame-relay-switch ports as follows: the Methods configured in 1, 4, and 5 are shown in the port ing relationship.

 Step 3: follow the line Step 4: Configure each vro after it is started

S0/0 interface configuration of R1: interface Serial0/0
Ip address 10.0.0.1 255.0.0.0
Encapsulation frame-relay
Clock rate 2000000
Frame-relay map ip 10.0.0.5 105 broadcast
Frame-relay map ip 10.0.0.4 104 broadcast
Configure interface Serial0/0 for the S0/0 interface of R4
Ip address 10.0.0.4 255.0.0.0
Encapsulation frame-relay
Clock rate 2000000
Frame-relay map ip 10.0.0.5 401
Frame-relay map ip 10.0.0.1 401 broadcast
No frame-relay inverse-arp
Configure interface Serial0/0 for S0/0 of R5
Ip address 10.0.0.5 255.0.0.0
Encapsulation frame-relay
Clock rate 2000000
Frame-relay map ip 10.0.0.4 501
Frame-relay map ip 10.0.0.1 501 broadcast
No frame-relay inverse-arp
After the preceding method is configured, the intercommunication between R1, R4, and R5 can be realized. R1 serves as the hub of Frame Relay.