[Go] Raspberry Pi Mobile network connection (configure 4G network adapter)

1. Identify the internet card

With the command LSUSB, you can continue down if you can identify it.

2. Install the NIC driver

The Internet card will usually have 2 functions, one is a virtual CD-ROM, used to install the driver, and the other is a network connection modem.

Under Linux, it is necessary to install the Usb-modeswitch driver to correctly identify and start the modem function of the NIC.

sudo apt-get install Usb-modeswitch usb-modeswitch-data

3. Install Dial-up software

There are many dialing software under Linux xvdial, Sakis, etc., we choose Sakis

sudo wget http://www/sakis3g.org/versions/latest/armv4t/sakis3g.gz

sudo gunzip sakis3g.gz

sudo chmod +x sakis3g

4. Configure Internet Files

Next we need to configure the Internet card according to the network of different operators.

sudo nano/etc/ppp/options #打开ppp协议文件, insert the following command at the end of the file:

Ipcp-max-failure 1000000000

Persist

5. Start the software and connect to the Internet

sudo./sakis3g--nostorage--noprobe--interactive

Click "Connect with 3g" on the window.

./SAKIS3G Connect Info #查看3g网络连接情况!

Excerpt from: http://blog.csdn.net/huayucong/article/details/51706307

[Go] Raspberry Pi Mobile network connection (configure 4G network adapter)