Gold Code Bill pass bill management strategy

Here's a collation of the FAQ and video on bill Management:

(Frequently asked questions) when you print a check, the lowercase corner is not printed out, what to do?

Move the printer bezel 8 millimeters to the left and add the printer's (forward) left deviation value to 8. Take epson-635k For example (the printer has a default bezel position of 25, and the printer is left deviation value 33)

, move the printer bezel 8 millimeters to the left, to the position of 17 (25-8=17),

and the printer (forward) left deviation value plus 8 mm, to 41 (33+8=41).

If your printer does not have a default location, move the printer bezel to the left.

Then reset the printer (forward) left margin.

(FAQ) When you print a check sideways, what do you do if the stub bar doesn't print out or just print out one?

It is recommended that you print checks with forward direction. If your printer does not support forward printing, use lateral printing, move the printer bezel 2 to 5 millimeters to the right, and increase the (side) top margin of the printer to 2 to 5 mm. For example, the printer bezel is 15, the (lateral) top difference is 24.5, now move the printer bezel to the right 2 mm to 17 (15+2=17) position, while the printer (side) margin plus 2 mm, to 26.5 (24.5+2=26.5)

First, fill in the information of the unit:

second, fill in the printer deviation:

If it is version 3.21, print setup on the Point toolbar pops up the Printer settings window, filling in the forward print deviation and biased deviation.

If it is version 3.22 and above, "printer" on the dot toolbar, the printer deviation (margin) Setting window will pop up, filling in the forward print deviation and biased deviation.

The deviation value must be printed with A4 paper.

Three, fill in the bill:

1, in the Capital Amount column to fill in lowercase money automatically to uppercase, fill out the bill, point [print].

2, can be based on pinyin first letter to find information on the current unit, can also be filtered by Chinese characters of units.

3. The information of the Exchange unit is automatically saved after the bill is printed.

Four, some other settings:

1, change the direction of printing: Point toolbar on the "Printing direction."

Side print:

Forward Print:

2, Query Statistics: Point Toolbar on the "Query bill."

3. Formatting and position adjustment: "format preview" on the dot toolbar.

4, set up the instrument used by the unit:

(1) set in [more tickets]

(2) or add the bills used in this unit to the common functions