Before setting the speed limit for a golden wave router to limit the speed of a LAN, we need to know the bandwidth used, and several computers are using the bandwidth. The speed limit is also set based on this, assume that the router is a golden wave router with a bandwidth of 2 M and two computers are in use. 1. To set an IP address, first log on to the vrodhcp and set the vro parameters. Here we will introduce how to enable DHCP. Of course, you can also manually set the IP address.
DHCP server: Enable address pool start address: 192.168.1.2 address pool end address: 192.168.1.3 Gateway: 192.168.1.1 then set the computer www.2cto.com
Right-click "Network Neighbor"-"properties"-"Local Connection"-"properties"-"double-click cp/IP protocol"-and choose "Get IP address automatically. Ii. broadband speed limit 1. Check the bandwidth control before enabling the IP bandwidth control. bandwidth options: ADSL line, uplink total bandwidth: 1024, and downlink total bandwidth: 2048. You 'd better click Save.
2. The bandwidth control rule is to limit the bandwidth of two computers, so you must set the rule when setting it. If you have set the bandwidth limit of a router, delete all the original settings first.
Add a new entry-IP bandwidth control rule configuration.
Check if the IP address range is 192.168.1.2-168.192.1.3, upstream: 512, and downlink: 1024. The bandwidth limit is set to 1024, you can also set a slightly larger value of 1200, and click Save after setting all the parameters.