Start DM and enter "dm" directly in the DM directory to enter DM. Start a description window and press any key to enter the main screen. DM provides an automatic partitioning function, which is completely completed by the software without manual intervention. Select "(e) asy disk instalation" in the main menu to complete the partitioning. It is convenient, but you cannot partition according to your wishes. Therefore, it is generally not recommended.
In this case, you can select "(a) dvanced options" to go to the level-2 menu, and then select "(a) dvanced disk installation" for partitioning.
The hard disk list is displayed. Press enter.
If you have multiple hard disks, press enter to select which one to partition.
Http://bbs.XXXXX/UpFiles/200509/28/19778.gif
Then select the partition format. In general, we select the FAT32 partition format.
Next is a window to check whether FAT32 is used. It indicates that FAT32 is compatible with DOS, that is, FAT32 cannot be used in DOS.
This is an option for selecting the partition size. DM provides some automatic partitioning methods for you to select. If you need to partition according to your own wishes, select "option (c) define your own ". Next, you will be asked to enter the partition size: first, enter the size of the primary partition, and then enter the size of other partitions. This work continues until all the capacity of your hard disk is divided. After the partition value is set, the detailed results of the last partition are displayed. In this case, if you are not satisfied with the partition, you can adjust it by pressing the following prompts. For example, the "Del" key deletes a partition and the "N" Key creates a new partition.
After setting, select "Save and continue" to save the setting result. A Prompt window is displayed. Confirm your settings again. If you are sure to press "Alt + C" to continue, otherwise, press any key to return to the main menu.
Next is the prompt window, asking if you want to perform quick formatting. unless there is a problem with your hard disk, we recommend that you select "(y) es ". Next, let's look at a window to ask if your partition is based on the default cluster and select "(y) es ". The final confirmation window appears. Select confirm to start partitioning. At this time, DM starts partitioning, which is fast and can be completed in a short time. Of course, in this process, you must ensure that the system is not powered off. After the partition is completed, a prompt window appears. If you have different requirements, press any key to continue.
The following will prompt you to restart. Although DM prompts you to restart using hot start, we recommend that you use cold start for small worker, that is, press "reset" on the "host" to restart. In this way, you have completed the hard disk partitioning, and the steps seem to be a bit more steps. In fact, you will not be aware of it after you are familiar with it. Of course, this is not just the function of DM. We started to enter its basic menu. DM also has an advanced menu. You only need to press "Alt + M" in the main window to enter its advanced menu. You will find that there are some more options, if you are interested, you can study it slowly.
DM video tutorial
