Graphical tutorials on how to set up ADSL network connections and dial-up connections in Windows 7

One, the Windows 7 ADSL network connection setting method.

Many home users and small business users are basically using ADSL Internet, so a special topic to explain:

1, the connection model for the computer--router--ADSL modem LAN mode connection settings

A, in the Control Panel--Network and Sharing Center, set the current network type can (general selection of work network), IP address such as special needs do not have to set (the company's general office in order to consider sharing needs to consider assigning IP address), the router automatically assigns the Computer runtime IP address ( is generally the intranet address). Figure 1 (middle section) below:

B, to configure the router ADSL automatic dialing function

The method is: On the electricity starts the router, opens in the browser input router's IP address (generally is 192.168.1.1, may enter in the operation CMD Ipconfig to see the gateway the IP address), the input router's login account and the password (generally all is admin), The most common home or small business Router management interface resembles the following figure 2:

The picture above is Tp-link R402 's management interface screenshot, we can set inside the network parameter--wan port, input the Internet account and password password (telecom or netcom to your installation time left to you), under the choice of automatic connection, So as long as each router and adslmodem on the electricity will automatically control the ADSL login network, no need to manually intervene again. Other router settings are similar.

C, set up, as long as you confirm that the router can be properly connected to the network, then Windows 7 here basically do not need to set up, in the early Windows XP, but also to create a network connection every time, seems to be in Windows 7 also saved, default all to the operating system to complete.

2, connect model computer--ADSL modem of ADSL computer dialing set method.

For friends who do not have a router, you need to make Ppoe dialing settings on Windows 7 and set the method as follows:

A, in Figure 1--Change the network settings--click to set up a new connection or network. Then select the first item "Connect to the Internet" (Figure 3 below)

As the machine is already connected to the network, the following interface appears (Figure 4 below):

We chose "still to set up a new connection" (Figure 5 below):

Select the broadband Ppoe connection (Figure 6 below):

Enter your Internet account and password. Incidentally, a lot of notebooks, such as wireless network card and wired network card, such as the use of wireless network card is also set up in this selection of wireless (W) can be switched to wireless networks. Configuration method is similar.

Two, the Windows 7 General modem telephone dial-up Connection setting method

1. Connection model for computer--Telephone dialing setting method of ordinary modem

Friends using analog dialing may not be much now, but let's introduce the option of dialing (D) in Figure 6 above (turn the modem on or off, of course), as shown in Figure 7 below.

Enter your phone number, username, and password in the figure above to create a modem dial-up connection.

Small note: In Figure 1, Windows 7 Network settings Many features are interleaved, multiple different locations can achieve the same settings, such as ordinary dial-up users can be directly in Figure 3 location to set the dial-up connection can be set up, you can also "connect to the workspace"- Direct dialing to set modem dialing, the result is the same, just enter the position is different.

What are some practical ways to install Windows 7 from your hard disk

Keywords: hard disk installation, installation system

Method 2, taking advantage of Windows 7 own startup files and repair features:

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the d:win7 directory under the bootmgr and boot, EFI, source copy to the C-packing directory, for the upcoming Windows 7 start to do preparation documents;

D, enter C:BOOTBOOTSECT.EXE/NT60 C: At Windows Vista's cmd command-line prompt, excluding the comma after C: successful indicates that the repair boot boot was successful (booting to Windows 7 's boot file);

E, close the command window and restart the computer, will automatically enter the Windows 7 installation interface, choose the installation language, setting time and keyboard, etc.

F, the "Start Installation Interface", the days of special reminder to do not click "Install Now" but click on the lower left corner of the "Repair computer", enter the "System Restore Selection", select the Last "command Prompt" to enter the DOS window. We in order to save a startup disk pocket a big circle finally into the DOS;

G, enter "D:win7sourcessetup.exe", do not quoted, start installing Windows 7;

H, choose language and keyboard settings, format c disk, start installing Windows 7;

3, the original operating system for Windows 7 hard disk installation of the new Windows 7 method:

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the Boot press F8, select "Repair System", select the keyboard, enter the administrator password, select the last command to repair (command Prompt);

C, enter "D:win7sourcessetup.exe", do not quoted, start to install Windows 7;

D, enter the installation interface, select language and keyboard settings, format c disk, start to install Windows 7;

4, the use of WinPE boot disk installation

This is the simplest way to ensure that the Windows 7 ISO file is first extracted to the D disk (not the system disk):

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the d:win7 directory under the bootmgr and boot, source copy to the C-packing directory, for the upcoming Windows 7 start to do preparation documents;

D, at the cmd command prompt enter C:BOOTBOOTSECT.EXE/NT60 C:, excluding the C: after the comma, prompted successful that the repair boot boot succeeded (the boot to the Windows 7 boot file);

E, Close Command window, unplug the PE boot disk, restart the computer, automatically enter the Windows 7 installation interface, choose the installation language, setting time and keyboard, etc.

F, the "Start Installation Interface", the days of special reminder to do not click "Install Now" but click on the lower left corner of the "Repair computer", enter the "System Restore Selection", select the Last "command Prompt" to enter the DOS window. We in order to save a startup disk pocket a big circle finally into the DOS;

G, enter "D:win7sourcessetup.exe", do not quoted, start installing Windows 7;

H, select language and keyboard settings, format c disk, start installing Windows 7, please refer to the following details:

Complete tutorial on installing Windows 7 under WinPE

Special tips for the installation process for Windows 7:

A, install choose Custom's brand-new Install mode, do not recommend using update upgrade mode;

B, Windows 7 registration code if you can not remember to enter first, and remember the settings window below the online activation option to cancel;

C, in the selection of the drive, be careful not to choose the wrong may lose data, select a good system disk recommended click on the following advanced options to format the partition, do not remove the installation partition after installation and then create, otherwise the default Windows 7 flagship version will create a hidden partition;

How to install Windows 7 from your hard disk, so write an article about how to install Windows 7 from your hard disk, and of course this method applies to Vista, and hopefully it will help.

Prepare a Windows 7 CD-ROM image iso file.

Two, if you intend to install dual system, then directly loaded ISO to the virtual CD-ROM drive or to extract the ISO to a directory, and then execute the root directory setup.exe can be, but for the maintenance of convenient management please comply with Windows The default convention for 7 is best to install a drive that does not conflict with an existing system to have Windows 7 mounted to D. In addition, the installation sequence of the dual system recommends that you install the old operating system first, and then install Windows 7. Please refer to the article in detail:

Windows XP and Windows 7 dual system installation and boot menu repair

Third, if your machine has its own Windows operating system, such as Vista, Windows XP, and so on, intends to install a new installation of Windows 7 continue to look down.

1, the original operating system for Windows XP hard disk installation of the new Windows 7 method:

Method 1, using the repair function of the XP system installation disk:

A, use UltraISO to extract windows7 ISO mirrors to a non-system disk, such as (d:/win7), Method: UltraISO "Operation"-"extract ...", then select the Win7 of D disk and wait for the fetch to end. then restart the computer;

B, set the XP installation disk to boot press F8 to enter the command line repair system (note that this is not a normal DOS boot disk), and then execute the D:win7sourcessetup.exe at the DOS prompt to start installing Windows 7. In the installation process, the target disk select C disk, you can use the advanced options in the formatting function;

C, the choice of language settings keyboard, format c disk to start installation of Windows 7, the specific installation process, please refer to the relevant articles, the same below;

Method 2, taking advantage of Windows 7 own startup files and repair features:

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the d:win7 directory of bootmgr and boot directory copy to the C-packing directory, for the upcoming Windows 7 start-up to do the preparation of files, and in the C-packing directory to build a sources folder;

C, the d:win7sources under the Boot.win copy to C disk just built sources folder;

D, in the beginning of Windows XP input C:bootbootsect.exe/nt60 C:, and enter, excluding C: After the comma, prompted successful to indicate that the repair boot success (boot transfer to Windows 7 boot file);

E, close the command window and restart the computer, will automatically enter the Windows 7 installation interface, choose the installation language, setting time and keyboard, etc.

F, the "Start Installation Interface", the days of special reminder to do not click "Install Now" but click on the lower left corner of the "Repair computer", enter the "System Restore Selection", select the Last "command Prompt" to enter the DOS window. We in order to save a startup disk pocket a big circle finally into the DOS;

G, enter "D:win7sourcessetup.exe", do not quoted, start installing Windows 7;

H, choose language and keyboard settings, format c disk, start installing Windows 7;

2, the original operating system for Windows Vista hard disk installation of the new Windows 7 method

Method 1, using the repair function of Vista system installation disk:

A, use UltraISO to extract windows7 ISO image to a non-system disk, such as (d:/win7), Method: UltraISO "Operation"-"extract ...", then select D disk Win7 and wait for extraction to end;

B, in the BIOS set for the optical drive to boot, into the Vista installation interface;

C, select the lower left corner repair computer, automatic search system, prompted to load the driver or shutdown, choose to close and enter the repair option;

D, select the last command to repair, in the command box input d:win7sourcessetup.exe and enter;

E, choose the installation language to set the keyboard, format the C disk, and start installing Windows 7;