Guo line LG G3 D858 brush LG G3 D858HK Tutorial (Memo)

Pure hand, reproduced please specify the source ~

Brush machine is at risk, there is no responsibility for the problem! In the spirit of entertaining purposes, share, out of the problem is not responsible!

Materials to prepare:

1, mobile phone A (nonsense) country line LG G3 d858

2,root tool for root phone, I use the https://www.kingoapp.com/in the Kingo root tool, very slow (about 15 minutes) but once succeeded. I used to use the root master, 360root seems to be OK, try it yourself

3,root Explorer is used to modify the Build.prop file, this file in the root directory/system/below (with root expolorer see), if I write wrong, I search it diy.

4,LG G3 d858hk tot file is the bottom package I Baidu plate has Http://pan.baidu.com/s/1ntGL6IX brush Machine said there is something seems to have

5, mobile phone PC driver this if I offer the bad with DIY

6,LG Flash Tool This must have (CAUTION!!!!!) , 64-bit operating system failed, 32 recommended for operating system)

7, Universal DLL I have it on my plate. The connection above looks

Sequence of operations:

1,root Mobile

2, mobile phone installation root Explorer to modify the Build.prop *module=lg-d858--"LG-D858HK note the permissions of the file is 644 if you have not changed the general no problem directly save the changes to exit the line.

3. Install PC Driver

4, install the DLL in the LG Flash tool compression Package to overwrite the login restrictions of the same DLL unlocked flash tool in the installation directory

5, mobile phone connection pc

Change to Com41 according to the mark, why? Because the Flash tool to use this port, port >=41 are available.

Brush Machine Operation:

1, mobile phone into the brush mode, method: Shutdown-"Press and hold the volume + Connect PC---" appeared down-load logo release button-"and 5 seconds into the brush mode, to ensure that the phone on the PC of the COM port in the state of 41." Then disconnect the PC from the phone and wait for the Flash tool to be ready

2,flash Tool Select the universal DLL select Tot file (Zip compression package next to tot), began to wait for the CRC to check the appearance of about 3 minutes 2G file time is normal.

3,flash tool shows ready when the phone is connected to the PC

4, and then waited for the success.

The 858HK is really smooth and comes with Google Suite! Like it!

Brush machine operation If there is not clear where, self-search LG G3 Brush tot method. I can't find a message.

Guo line LG G3 D858 brush LG G3 D858HK Tutorial (Memo)