H3C-S5560 wireless control module channel utilization rate view optimization, h3c-s5560 Channel

H3C-S5560 wireless control module channel utilization rate view optimization, h3c-s5560 Channel

 

H3C-S5560 wireless control module channel utilization rate view Optimization

 

1. Check the IP address of the Wireless AP

Dis wlan ap name ap01 address // "ap01" AP name

AP name IP address MAC address

Ap01172.16.1.10ac74-09d8-5960

 

2. Enable the telnet function for the corresponding AP

Sys

[JF-S5560] probe

[JF-S5560-probe] wlan ap-executeap01exec-console enable

 

3. telnet to the corresponding AP

Telnet 172.16.1.10

Trying 172.16.1.10...

Press CTRL + K to abort

Connected to 172.16.1.10...

 

**************************************** **************************************

* Copyright (c) 2004-2016 Hangzhou H3C Tech. Co., Ltd. All rights reserved .*

* Without the owner's prior written consent ,*

* No decompiling or reverse-engineering shall be allowed .*

**************************************** **************************************

 

Password:

 

4. view the channel utilization of the AP.

Sys

[Ap01] probe

[Ap01-probe] dis ar5drv 2 channelbusy // "1" for 5G band, "2" for 2G band

 

ChannelBusy information

Ctl Channel: 06 Channel Band: 20 M // "06" indicates Channel 6

Ext Channel:

Record Interval (s): 9

Date/Month/Year: 19/05/2017

// CtlBusy (%): Total busy degree; TxBusy (%): Send busy degree; RxBusy (%): receive busy degree

Time (h/m/s): CtlBusy (%) TxBusy (%) RxBusy (%) ExtBusy (%)

01 09:14:54 25 2 22 0

02 09:14:45 23 2 20 0

03 09:14:36 24 2 21 0

04 09:14:27 28 2 25 0

05 09:14:18 26 2 23 0

06 09:14:09 26 2 22 0

07 09:14:00 24 2 21 0

08 09:13:51 25 2 22 0

09 09:13:42 24 2 21 0

10 09:13:33 25 2 22 0

11 09:13:24 24 2 21 0

12 09:13:15 24 2 21 0

13 09:13:06 27 2 23 0

14 09:12:57 25 2 22 0

15 09:12:48 22 1 20 0

16 09:12:39 25 2 22 0

17 09:12:30 25 1 23 0

18 09:12:21 29 2 26 0

19 09:12:12 26 2 23 0

20 09:12:03 25 2 21 0

 

Note:

TXAndRXNot equalCtlBusyBecause there are still non-WifiInterference.TX + RX = wifiInterference

ChanneBusy is used to view the current working conditions of the channel from the AP perspective, rather than the usage of the current AP on this channel.

It is generally considered that more than 60% of the channel is busy, and 80% of the channel is considered unavailable. It is recommended that the optimization value be less than 40%.