Happy sharing laptop wireless Internet access tutorial

More and more laptops are used, and their small shape is getting closer and closer to the performance of the platform. How can I set wireless Internet access for my laptop? The following is a detailed introduction and I hope it will help you.

Currently, we have two laptops. We assume that these two laptops support the wireless network connection, and some desktop computers and one wireless network node with the routing function, an adsl modem. Based on these hardware conditions, let's build a wireless LAN.

◆ Wireless Internet access settings for two laptops: the most convenient method is to use the newly added Bridge Function in Windows XP.

Accessories: two local cables, one network cable, and adsl modem.

First, we need to connect a network cable to the MODEM, and set the IP address of the wireless network adapter of the host to 192.168.1.1, And the subnet mask to 255.255.255.0. Right-click "Network neighbors" and select "properties" to go to the "Wireless Network Connection Properties" Page. Select "wireless network configuration" and modify the "SSID" name. Select "advanced", set "network to be accessed" to "computer only", and disable the "automatically connect to a non-preferred network" option.

2. Next, we need to set the corresponding settings for the laptop, set the network of another laptop, set the IP address of the wireless network adapter to 192.168.1.2, and set the subnet mask to 255.255.255.0, right-click "Network neighbors", select "properties", select "Wireless Network Connection Properties", and then select "wireless network configuration ", add the SSID of the wireless network adapter of the host notebook in "preferred network. Open the "advanced" Page, set "network to be accessed" to "computer-only", and disable the "automatically connect to a non-preferred network" option. The above two steps are applicable to the Windows XP/VISTA operating system)

◆ How to set wireless Internet access for laptop via Wireless AP

Before setting wireless Internet access for a laptop, you need to prepare the hardware: two laptops, and a desktop, Wireless AP with routing function, and adsl modem. The procedure is as follows:

1. Set wireless network nodes. The function of a wireless network node is to convert a wired network signal into a wireless signal. Here, we recommend that you select a location that is not easily blocked and that the signal can cover all corners of the house. After you view the wireless network node specification, you will know the IP address of the AP. Generally, the IP address of the AP is 192.168.1.1 and the subnet mask is 255.255.255.0. In the network properties, set the IP address of the wireless network adapter of the laptop to 192.168.1.100 and the subnet mask to 255.255.255.0 to keep the IP address in the same network segment as the wireless network node.

2. After the wireless network node is enabled, the wireless network adapter will automatically search for the wireless network node. Then open IE, enter http: // 192.168.1.1/in the address bar, and enter the account and password of the corresponding factory device, after correct input, you can enter the management interface of the wireless network node.

Third, in the Management Interface of this wireless network node, we need to set the IP address of the IP wireless network node to static or dynamic. It must be noted that if you add a broadband connection to a home network, the IP address of the broadband access method is dynamic. Therefore, you can set the IP address of the wireless network node to dynamic access, and vice versa, to static access.

4. Connect the broadband access network cable to the wireless network node, set the IP address of the wireless network adapter of the laptop to be automatically obtained, or keep it in the same network segment as the wireless network node. After the operation, the laptop wireless Internet access settings are completed. However, before accessing the internet, we recommend that you enter the security option interface to set the corresponding password to encrypt the current network, prevent others from using your network bandwidth.