High CPU temperature how to deal with the high CPU temperature method

Ways to handle excessive CPU temperature

One, clean CPU cooling fan

1 The easiest and most cost-effective way to do this is to use the brush and the fur tiger to clean the fan of the CPU heatsink and to improve the processor's thermal performance after the cleanup.

2 cleaning the fan is a need for patience, and the fan's dead end is not particularly easy to clean, combined with skin tigers, brush and then blow, I believe that only patience, dust will soon go without trace, this recruit can to some extent significantly improve the CPU cooling capacity.

3 Clean up their own CPU fan does not have any technical content, we use the tool is the brush and fur tiger, in our patience after repeated cleaning, the original dirt face of the radiator will become a brand-new. This will greatly improve the heat dissipation performance of the radiator, while the noise will decrease correspondingly. For each board of the chassis cleaning, we should be standing at hand with the brush and fur tiger, six months or so clean up a more reasonable.

End

Re-apply thermal grease

1 Sometimes when cleaning the CPU cooling fan, the CPU temperature has not been significantly improved, then we also need to apply thermal grease for the CPU, thermal grease due to the use of the longer time will become chapped, so that the performance of heat conduction decline. Re-apply thermal silicone grease so that the processor and radiator fit tightly together to fully take the heat away from the CPU. In the smear process, need to pay attention to the need to apply the thermal grease evenly, to avoid uneven smear, bubble generation.

2 recommend that you use some professional gadgets, for the CPU heat dissipation surface evenly coated silica gel, the following figure, is our more commonly used CPU smear tool, in the computer city is easy to buy.

3 No matter what kind of air-cooled radiator, apply thermal grease is a very necessary lesson. Only the thermal grease is applied to allow the CPU to pass all the heat to the radiator to ensure that the processor is working within normal temperature. At present, there is no silicone grease radiator, radiator in the factory has been evenly applied to the radiator and the CPU contact surface, to the machine running, the CPU will be the heat evenly coated silicone grease smear good, very convenient, user-friendly.

End

Third, the combination of two methods to change the larger-caliber cooling fan

The above method of CPU heat improvement is not very large case, it is recommended to replace the larger diameter of the cooling fan. Replace the larger diameter air-cooled radiator, the upgrade budget cost less; and the cooling effect will have a better performance, it is recommended, in addition, if the user on the thermal requirements are high, we recommend that you can also use a number of high-end fever configuration to use the cooling mode: water-cooled cooling, which will be to solve the CPU temperature is too high the ultimate solution.

High-end air-cooled radiators use a larger-diameter cooling fan, which can bring enough airflow to the processor's calorific value even at lower fan speeds. Similarly, in the radiator fin also uses the heat conduction performance better copper material, usually this air-cooled radiator market price is approximately dozens of yuan to hundred yuan, chooses the less cost to upgrade the better air-cooled radiator is also a good choice. If there is a higher demand for cooling, such as summer like long running all kinds of large-scale games and applications friends may wish to use the most effective high-end heat dissipation method-water-cooled cooling.