Hot Plate welding Machine work flow

One, hot plate welding machine , operating instructions:

1. Turn on the power switch button, the HMI enters the start interface, touch the HMI to enter the operation interface for parameter setting.

2. Enter the HMI when the default is the state of the mode, to do normal operation, please press the Automatic status button to switch state, the automatic status light on the man-machine interface.

3. Only in the manual state to touch the head forward, the nose back, hot plate up, hot plate down and other buttons to act. Manual status on the HMI is lit on the manual state.

4. Head forward, the head back button sub-left template and the right side of the template, the operation of the HMI to see the instructions on the operation.

5. When the time setting of the direct touch HMI time display area, will pop up the numeric keypad for parameter setting, set well after pressing the key to confirm.

6. The counter is in the operation of the production of the product count, every work once counted, counting clear 0 button is to reset the counter to clear zero.

7. Normal operation should be both hands while pressing the green Operation button, the time difference between hands can not exceed 500MS, otherwise can not start the normal production of machinery. Red for emergency stop button, press this button the machine will stop working under any circumstances.

8. The left press button is the left head press material, the right press material is the right side of the head clamp material with. The left and right press buttons are used in a manual state.

9. When there are any obstructions in the work area, the machine will not work properly.

10. Thermostat is to set the temperature of the product heating mold, reached the set temperature to stop heating. The thermostat on the left controls the temperature of the template on the left, and the thermostat on the right controls the stencil temperature on the right.

Second, Hot plate welding machine , product features:

1, linear guide for movement, accurate and smooth. Special Electric mold design, beautiful welding, life. Temperature control System device error ± 0.5 degrees. CHC parts are machined and assembled to meet the precise requirements of vertical and horizontal.

2, the use of human-machine interface with the PLC computer control system, safety door device, machine action is correct, safe operation. Hydraulic system, motion welding more stable, accurate.

3, the operation is simple, the application scope is wide, the fusion connection can reach the water dense airtight welding effect. For larger or irregular workpiece welding, can be solved. The speed of the labor efficiency is high, faster than the traditional one times. The digital PID temperature control function, the welding temperature is more stable.

Three, hot plate welding machine, the scope of application:

After the car lights, direction lights, bumper, refrigerator, fuel tank, battery filter, washing machine balance ring, vacuum cleaner, flying target, floating ball, how pallets, or other large-scale a rule must be watertight, gas-tight high-strength products

Hot Plate welding Machine work flow