How can I brush my red rice mobile phone? Graphic tutorial on red rice flash

Source: Internet
Author: User

Method 1: Recovery

Connect your phone to your computer and enable USB storage.

There will be an additional removable disk in the computer

Copy the refresh token to the root directory of the mobile phone.

When your phone is shut down, press "power key" + "volume down key" to call out Recovery

In this status, press volume down to select Recovery and then press volume up to confirm

Then, the screen prompts as follows. Don't panic. Click "power key" to go to the menu.

Press "volume down key" and select "wipe data/factory reset", then press "volume up key" to confirm

Select "yes" for confirmation and wait until the cleanup is complete.

Select "wipe cache partition" with "volume down key" and press "volume up key" to confirm

Select "apply update from sdcard" with "volume down key" and press "volume up key to confirm" (note: If the fl volume is stored in the root directory of the SD card, select "apply update from sdcard2"

After entering, find the copied refresh box and press "volume up key" to execute the flash brush

After the installation is complete, the system automatically jumps to the main interface and selects "reboot system now" to restart the system.

Method 2: ROM flash in the computer

Note: The official ROM cannot be used for wire swiping. Wire swiping must be used for wire swiping. Please download the ROM brush in advance.

[Detailed steps of red rice Line Brush tutorial]

Note: Because the phone cannot be restarted and the machine needs to be restored, the following steps are performed directly on the computer.

1. First, shut down your phone and connect your phone to your computer using a USB data cable. A prompt is displayed on the computer screen that requires driver installation.

2. A hardware driver named MT65XX PRELOADER will appear. Install the driver as needed.

3. Select "install from list or specified location (advanced)" and click "next" to continue

4. Select the first option, select "include this position in search", and click "browse" to find the drive location, as shown in the red box in the figure above, select from the graph. Click "next" to continue.

5. As shown in the preceding figure, the installation process is displayed after the search.

6. As shown in the preceding figure, after the driver is installed, there is still a step for the driver.

7. Decompress the flash drive file provided by the above editor and the files are in it. As shown in the figure above, click the folder in the red box first.

8. Click in and then click the program file in the red box.

9. Wait for the interface shown in the figure above to appear. The driver is installed. The main interface is displayed below.

Click "10 million images". Click "flash_tool.exe" to go to the main interface of the tool.

11. As shown in the figure above, the main interface of the flash machine tool is displayed. Click "load Scatter" (the button in the red box on the figure ).

12. The interface shown in the figure above is to load the text of the wire brush ROM. Where can I find it? You have downloaded the wire brush package in advance and decompress it directly after downloading it.

13. Decompress the package. One is a compressed package and the other is a folder.

14. As shown in the preceding figure, this is a file in the folder. Click here to select the line brush ROM text you want to add.

15. Click "open" after you select it ".

16. Then the interface shown in the figure above is displayed, with a piece of dense text information, which is the information of the ROM package. (This interface has basically completed more than half of the work.

17. Click "firmware> upgrade" in the red box on the figure. (after clicking the button, your mobile phone is originally equipped with a battery. Take the battery down and install it again .) In this way, the image will start to be refreshed. Otherwise, the image will not change. This interface takes about 1 minute.

18. As shown in the preceding figure, the percentage is displayed in the red box. When the value reaches 100%, the system displays the green circle icon as shown in the following figure, this indicates that you have successfully refreshed the image. Unplug the USB data cable directly, take out the battery and install it back, and you can start the instance successfully. This completes the red rice Line Brush tutorial.

How do I wire my Red Mi mobile phone? The above is the detailed steps of the red rice mobile phone line brush tutorial. If you encounter any unrecoverable mobile phone errors, you can solve the problem through the line brush. I hope this tutorial can help you

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.