How can I send MMS to Xiaomi 4 mobile phones? Illustration of Xiaomi 4 MMS method

 

To go to the Settings menu, click "menu"> "settings"> "wireless control"> "mobile network settings"> "Access Point Name. The setting values of each parameter are shown below:
Mobile APN settings are only applicable to mobile phone card users of China Mobile.
MMS settings: do not set unspecified parameters
Name: CMWAP
APN: cmwap
Proxy: 10.0.0.172
Port: 80
MMSC: http://mmsc.monternet.com
MMS proxy: 10.0.0.172
MMS port: 80
MMS protocol: WAP 2.0
Access Point Name Type: mms
After editing, press "MENU" and select "save ".
Send a MMS containing an image to your mobile phone number to test the sending and receiving status.
Note:
1. After the Cmnet settings are complete, set the dot selection point corresponding to this item in the APN list interface to green.
2. Enter the dialing status. Enter * #4636 # *. After the phone number is entered, the phone number is automatically set. Click the switch DNS check button in the lower left corner to display 0.0.0.0 allowed next to the button
3. Check the mobile network in the wireless and network settings. The E and Up and down arrows are displayed in the status bar.
China Unicom 3g apn settings
MMS settings
Home Page-MENU-settings-wireless control-mobile network settings-Access Point Name-MENU-New APN
Name: 3 gwap
APN: 3 gwap
Proxy: 10.0.0.172
Port: 80
Http://www.wo.com.cn server
MMSC: http://mmsc.myuni.com.cn
MMS proxy: 10.0.0.172
MMS port: 80
MMS protocol: WAP 2.0
APN type: mms
Appendix: China Unicom 2g apn settings (the following parameters are used if 3G services are not activated)
MMS settings
Home Page-MENU-settings-wireless control-mobile network settings-Access Point Name-MENU-New APN
Name: uniwap
APN: uniwap
Proxy: 10.0.0.172
Port: 80
MMSC: http://mmsc.myuni.com.cn
MMS proxy: 10.0.0.172
MMS port: 80
MMS protocol: WAP 2.0
APN type: mms
Common errors:
The GPRS service is not activated, or the GPRS service is stopped. First, confirm that the GPRS service has been activated and CMNET connection is supported (you can call 10086 for details, but mobile MM does not know much about it. The most accurate way is to view your traffic details on the Internet)
The entered MMSC address is missing or an error letter is entered.
Try to change the MNC. The values in the MNC are automatically read from the SIM card. Different cards are different. Keep the default value.
Many of you did not press "menu" to save the changes.
We recommend that you use an English name.
If it is modified multiple times, we recommend that you first reset it to the default setting by pressing menu, and then reconfigure the parameters.