How can I use hub to connect two computers at home to the Internet at the same time?

Http://www.tianya.cn/New/PublicForum/Content.asp? Flag = 1 & idwriter = 0 & Key = 0 & idarticle = 257376 & stritem = it
I have a machine in my house (with win98se) and a notebook (with XP ). I want to use hub because I want to access the Internet with my husband (I bought a hub because I was not quite clear about the situation .) internet sharing. but I don't know how to set it. Can you help me teach me. thank you.
We use telecommunications optical fiber.

Author: mackerel in the desert reply date: 16:23:53

Do you have any experts to help you?

Author: mackerel in the desert reply date: 16:29:58

Why can't anyone help me? I'm depressed. 5555555555
I cannot let my post sink.

Author: redfish001 reply date: 16:31:38

Ask again !!!

Author: mackerel in the desert reply date: 22:42:32

Thank you, redfish. I can understand the method you mentioned, but the specific operation won't happen.
Can you give me a detailed description of the settings?
I saw some related posts in Baidu last night. I thought it was similar to setting up the LAN in the office. However, when I set the IP address of any computer to fixed, the computer still does not work at the same time. there will always be a dialing error.
I'm stupid. I hope you can introduce it in detail. Thank you very much !!

Author: Search for Lin Xi reply date: 22:53:50

Have you considered installing a two-way Nic on a computer. In this way, the hub is saved. For more information, see the WINXP connection description. The explanation is very detailed.

Author: mackerel in the desert reply date: 23:05:05

The hub has spent Mi to buy it back. You always need to use it.

Author: Aigo reply date: 23:57:23

1. Optical Fiber of China Telecom ???
-------------------------------

Directly inserted into the optical fiber? No.
Is it fiber-to-floor broadband access?

2. Why not buy a route? It saves a lot of trouble.

3. The methods described in redfish001 must be implemented by software, such as sysgate.

Author: Tian Sha magic heart reply date: 0:05:47

I have a method. If you don't mind, try it:
Isn't a laptop XP system? Create a dial-up connection and change the IP address of the local connection to automatic. In the advanced section of the dial-up connection attribute, an option is to enable connection sharing for some connections, check in front, and then confirm that the computer will automatically set an IP address for you. It is best not to change the IP address set for you on the computer, and then set an IP address on the 98 computer, for the IP address of 98, you can refer to the IP address of XP, but you need to set up the gateway and DNS. Try again if you can access the Internet at the same time. Remember to dial the number.
I can help others set up such a network. I think it works. I don't need other software and can use limited devices.

Author: bloodwolf reply date: 00:10:19

Route is required. Otherwise, you can purchase a network card for dozens of times. If XP is used as the host, it is OK to share the network with XP. The client gateway and DNS are set to the IP address of XP.

Author: DISAPPOINTED camels reply date: 0:15:52

This is what I set in my house.
The network card addresses of XP and 2003 machines are set in the same network segment.
I usually use a gateway with an XP dial-up XP NIC address of 2003
ADSL is used for accessing the internet at home.

Author: Aigo reply date: 1:14:12

The magic of God is right. If you don't need software to implement the gateway, you can use the XP shared Internet access.
But the problem is that your XP is a notebook. I'm afraid you can use it as a server ..

No matter whether you use a network card or a hub, unless you have two methods in one machine, you have to change them when you are on the machine. The other one must be on, which is troublesome and consumes electricity.

You don't need to set up Route, IP address, gateway, and DNS. You can even dial your own cables. Just add a plug-in line.

Therefore, it is strongly recommended that you deal with unnecessary things. For some money and a little bit to get a hundred dollars to change the route, the convenience in the future is not a little bit.

Author: password cannot be retrieved reply date: 3:23:52

This can be done: ADSL is a gateway + hub + two machines (under the same IP segment)
For example, ADSL 192.168.1.1
Computer1 192.168.1.2
Computer2 192.168.1.3

Author: mackerel in the desert reply date: 08:40:26

Thank you for your help.
Through your introduction, I feel that the hub I bought is really bad. What should I do?
Author: password cannot be retrieved reply date: 3:23:52
This can be done: ADSL is a gateway + hub + two machines (under the same IP segment)
For example, ADSL 192.168.1.1
Computer1 192.168.1.2
Computer2 192.168.1.3

-----------------------------
You said this is for ADSL, my home is lan. The IP address connected to the Internet through this book is like 230.176.239.85 (the last one will change). The server IP address is 230.176.239.1
I don't know how to set up DNS and gateway.
In addition, I would like to ask you: if I set it according to the magic of God, will it fail to access the Internet if I don't have it? If you want to access the Internet, you have to change the settings. Is that true ??

Author: ukoo reply date: 8:47:59

Buy a simple router ~

It's easier to say than this. Search if you really don't want to buy it.

Http://www.google.com/search? Q = % E5 % 85% B1 % E4 % Ba % AB % E4 % B8 % 8A % E7 % BD % 91

Author: Aigo reply date: 10:44:52

Don't mislead people. Her machine is a dynamic IP address. How can we set static IP addresses ???? All of them take it for granted. How can they be done ???

The password cannot be recovered. The solution actually refers to the ADSL with the routing function.

If you do not want to install a route, either install a dual network card, or install sysgate or another network card.

However, if server a is installed and server B needs to access the Internet, server a must be enabled, which is too troublesome and the host load is too large. When I use it, the host does not need to be turned around.

So you should buy a router once and for all.

Prepared by: Qinqin and songming reply date: 11:22:13

Even go home and try again

Author: nzj9819 reply date: 11:43:30

The upstairs is right. You have to dynamically allocate the address, so you can only act as a proxy if there is no route, but you have to run the proxy on both machines, if you want to save money, use XP as an agent or pay for the device ^_^

Author: mackerel in the desert reply date: 12:33:11

Oh, thank you.
It seems that I have to buy another vro.
I'm sorry to ask again. If I buy a router, will it be okay to connect to two computers? If I don't want to make any adjustments, I can access the Internet at the same time ???
My current IP address has changed to 218. 95 .*.*
The IP address of the server is 218. 95 .*.*
PPP multi-link Timeout: Off
Transmission: TCP/IP
Authentication: pap
Server Type: PPP
Device Type: pppop
Thank you.

Author: stray ye qingworm reply date: 14:29:17

This method is absolutely feasible. The three computers in our dormitory are connected to the Internet, but there is a problem: the dialing machine often has svchost that consumes 100% of the CPU resources, resulting in a very slow machine, using a CCProxy LAN proxy can solve this problem. Or buy a cheaper route.

Author: the fallen man of the world: 14:43:26

Everyone should note that the landlord uses Telecom optical fiber cables! This is not ADSL!
It is best for the landlord to buy a vro, which can be used without any configuration.
Of course, the dual Nic solution is also feasible, but this dual Nic computer runs as a server, and the Internet will not be accessible if another computer is turned off.
At present, vrouters are very cheap. Why use dual-nic for one hundred blocks?

Author: DISAPPOINTED camels reply date: 15:44:10

This is what I set in my house.
The network card addresses of XP and 2003 machines are set in the same network segment.
I usually use a gateway with an XP dial-up XP NIC address of 2003
ADSL is used for accessing the internet at home.

Although my home is ADSL, but the cat does not have the routing function, so the Dynamic Address obtained in the same way as your Ethernet is built on the WAN micro port (pppoe) you can set the private network address for the NIC above.

Author: crazy magic God reply date: 16:02:17

Personal opinions:
Virtual dialing is required for LAN access. (do you have to know if I do not know, please give me some advice? In view of the individual's level, I am not professional, but I just mean it.) After dialing, you have two IP addresses on your host, one is the IP address in the dial (that is, the external IP address), the other is the IP address in the local connection (that is, the internal IP address), redfish said the fixed IP address refers to the local connection,

To achieve Internet sharing in the above environment, mutual gateway DNS should be the cheapest practice, and the effect is not bad, these are obtained after several actual operations, of course, I can't guarantee the best performance in the landlord's environment, but it should be said that it should be the best in most environments. It is also essential to implement the sysgate software.

Author: My wife's reply date: 16:53:20

We recommend that you use a router .. .. No need to use Hub!

Author: Da Zhuo ruoqiao reply date: 17:29:22

I use a vswitch and two computers can access the Internet at the same time. Enable the ADSL routing function. Set the sub-gateway to the default address of ADSL, and set the IP address to the same network segment as the default address of ADSL. The advantage of this is that you do not need to set up a server, and you can access the Internet on any machine.

Author: redfish001 reply date: 13:06:20

Author: stray ye qingworm reply date: 14:29:17
This method is absolutely feasible. The three computers in our dormitory are connected to the Internet, but there is a problem: the dialing machine often has svchost that consumes 100% of the CPU resources, resulting in a very slow machine, using a CCProxy LAN proxy can solve this problem. Or buy a cheaper route.
++ ++
The stray ye qingworm knows me !!! Moved !!! In fact, the 100% problem that svchost uses is not caused by sharing !!!
You did not turn off a service !!
I wonder if the problem has been solved by the landlord !!

Author: stray ye qingworm reply date: 22:49:04

redfish001: What service is not closed?