How do Samsung notebooks replicate through recovery (one-click-Restore) software? (WIN8)

1. Prepare a new hard drive and connect it to your notebook.(because the new hard drive will be formatted in action, make sure that no important data is on the new hard drive)



2. At the beginning of the interface, use the right mouse button click on the blank space.



3. Select "All Applications" in the lower right corner.



4. In the "Apply" list, select "Recovery".



5. This will enter the recovery (one-click Restore) software interface.



6. Click on "Disk Copy" at the bottom left.



7. In the Recovery prompt window, click "OK".



8. In the User Account Control window, click "Yes".



9. Select "Restoring Disk to Factory settings" and click "Disk Copy" at the bottom right.



10. After reading the Tip window, click OK.



11. Wait for reboot, will re-enter the "Recovery" interface.



12. After reading the prompts, click "Yes".



13. You are prompted to "set up the partition." Please later, as shown in the following figure:



14. After the partition is finished, you will be prompted to "disk duplication", as shown in the following figure:



15. When you wait for disk replication to complete, you are prompted to configure the user environment after the replication disk is being configured. Please later. "



16. When prompted "Disk copy completed", click "OK" at the bottom right.



17. You will be prompted to "reboot the system" and click "OK" again at the bottom right.



Upon completion of the above operation, the factory system is successfully copied to the new hard drive.