How do I configure a wireless router? How to set a wireless route

Step 1: enter 192.168.1.1 in the address bar of the browser and press Enter. The following dialog box is displayed:

Step 2: Enter the correct account and password (the default vro user name and password are admin ):

Step 3: successfully enter the operation interface, and a "setup wizard" will be displayed on the left side. The attacker enters the interface (normally, it will be automatically pulled out after entering the background ):

Step 4: go to the Settings Wizard page:

Step 5: click next to go to the Internet access method settings. There are three ways to access the internet. If your home is a dial-up Internet access, select PPPoE. Dynamic IP addresses can be used directly by computers through the network. The upper layer has DHCP servers. Static IP addresses are generally leased lines or residential bandwidth. The upper layer does not have a DHCP server or a fixed IP address: (generally, dial-up Internet access is used)

Step 6: If you select PPPOE for dial-up Internet access, you must enter the Internet account and password:

Step 7: click next to go to Wireless Settings. We can see the channel, mode, security options, SSID, and so on. Generally, the SSID is a name. You can enter it as needed. The mode is usually 11bgn. Wireless security options choose wpa-psk/WPA2-PSK.

Step 8: click finish.

Step 9: The vro will automatically restart after completion. (The interface that appears after success)