How do I customize the printing paper size under the WinXP system?

Specific methods:

1, the "Server Properties" interface

Click "Start"-"Settings"-"printers and Faxes." Click "File" and select "Server Properties" in the Drop-down menu, as shown in figure one.

2. Create and save custom paper

In Server properties, select Create new format. Give your own newly defined paper a name in table name, and it is recommended to name it in English and in numbers. This paper takes "123" as an example. Select using units: "Metric" in centimeters, and "inch" in inches. In width, height, enter the size of the custom paper (the height of the continuous paper refers to the length between the two torn paper bits). This paper takes 15cm wide, 20cm high paper as an example. The printer area margin is set on its own.

Finally click "Save". A format called "123" is generated. It represents the paper size of width 15cm, height 20cm.

3, in the printer driver properties to choose the custom paper

In Printers and Faxes, right-click the printer driver icon, turn on printer properties, click "Printing Preferences", click "Advanced", and click on the "paper spec" pull-down menu. Select the "123" paper type.

Note: Due to the mechanical structure of the printer (paper system, paper induction system), and other reasons, each printer has a range of paper, if the definition of paper too small or too large, beyond the feed range, at this time, the drive properties can not find a custom paper type.

4, in the application software to choose the custom paper

Commonly used software such as Word, Excel and so on can be page setup, select paper type. The default paper type is A4. This article takes word as an example to describe how to select a custom paper. (due to the higher priority of the software, the paper type in the software will prevail if the paper type selected in the software is different from the paper type in the drive.) )

Click "File" and select "Page Setup" from the Drop-down menu. Click on "Paper Type", click on "Paper Type" pull-down menu, select "123" can be.