How do I get Internet access for other devices that don't have a MAC address bound?

Our school dormitory uses the wired network, in order to limit other equipment's internet, the school network management will my Computer Ethernet card mac binding static IP, so that the Internet port using other devices will not be able to access the Internet. But I also have the Android phone, the ipad tablet, how to surf the Internet? Technology talent is always respected "technical, unconstrained", because the Internet port is bound to the computer's MAC address, so the breakthrough is to map this binding MAC address to the router, so that the router can surf the internet, Then with the wireless hotspot of the router, my notebook, mobile phone, tablet can be all online. The following small series tells you how to break through the binding MAC address network barrier?

First to the computer city to buy a wireless router, connect the network cable to the computer normal Internet, and then start a command prompt, enter the "Ipconfig–all", get the current Ethernet local connection IP, Nic Mac, Gateway, DNS and other parameters, you can see the local IP address and MAC address is " 192.168.1.105 "and" 50-e5-49-c9-9d-ff ", now write down this information (Figure 1).

Prepare the network cable will be no line by the LAN port and computer connected, and then enter the router setup interface, switch to the "network parameters →mac address cloning", and then click "Clone MAC Address", so that the current router's MAC address set to and the current computer network card MAC address consistent (Figure 2).

Continue to switch to the network parameters →lan port settings, the LAN port IP set to 192.168.0.1 (because the school switch network segment is 192.168.1.X segment, where the network segment not together), and then click "Save" (Figure 3).

After completing the settings above, continue to open the wireless hotspot of the router, then disconnect the computer from the network, and finally connect the school network cable to the router's WAN, so that the phone or the flat-panel Wi-Fi connection can be switched on.