Analog AP application topology
To ensure smooth setup, be sure to make the following preparations:
Note:
1. If the NIC driver and client are not installed, click to reference:
2. If you do not know how to access your computer. Click to reference:
Please click to download the latest client software:
Download and decompress the client software, open the folder after decompression, double-click to run (setup.exe), and select
RepairAnd click
Next Step, As shown in the following figure:
Prompt
Maintenance complete, Select
Yes. Restart the computer immediately.And click
Complete, As shown in the following figure:
Open
TP-LINKWireless Client applications SelectAdvanced,SoftAPModeSelectOpen, ClickConfirm Enable the Soft AP mode. As shown in the following figure:
After the SoftAP mode is enabled, the default wireless SSID is SoftAP and the password is 12345678, as shown in the figure below:
1
,In
Internet
Connection SharingSelect the corresponding network connection from the drop-down list. As shown in the following figure:
Note:Unicom is a 3G connection in this example. The actual 3G connection name prevails.
2
,
In
Network nameAnd
Security KeyIn this example, the network connection is set to local connection,
Network nameIs zhangsan,
Security Key
1a2b3c4d), click
Application, As shown in the following figure:
Note:If your computer is connected to the Internet through a broadband connection,
Internet
Connection SharingSelect a broadband connection. If your computer is connected to the Internet through 3G connections,
Internet
Connection SharingSelect 3G connection.
3
,Prompt
Configuration
SoftAP
Mode successful, Click
Confirm, As shown in the following figure:
Now, the analog AP is successfully set, and the wireless client can connect to the analog AP signal to access the Internet.
