How do I set up Windows 7 ADSL network connection?

The basic method of network configuration for Windows 7 is limited to space, and does not elaborate on the most common ADSL network connection settings and dial-up settings. This article is devoted to (add a lot of pictures to try to be more detailed).

One, the Windows 7 ADSL network connection setting method.

Many home users and small business users are basically using ADSL Internet, so a special topic to explain:

1, the connection model for the computer--router--ADSL modem LAN mode connection settings

A, in the Control Panel--Network and Sharing Center, set the current network type can (general selection of work network), IP address such as special needs do not have to set (the company's general office in order to consider sharing needs to consider assigning IP address), the router automatically assigns the Computer runtime IP address ( is generally the intranet address). Figure 1 (middle section) below:

B, to configure the router ADSL automatic dialing function

The method is: On the electricity starts the router, opens in the browser input router's IP address (generally is 192.168.1.1, may enter in the operation CMD Ipconfig to see the gateway the IP address), the input router's login account and the password (generally all is admin), The most common home or small business Router management interface resembles the following figure 2:

The picture above is Tp-link R402 's management interface screenshot, we can set inside the network parameter--wan port, input the Internet account and password password (telecom or netcom to your installation time left to you), under the choice of automatic connection, So as long as each router and adslmodem on the electricity will automatically control the ADSL login network, no need to manually intervene again. Other router settings are similar.

C, set up, as long as you confirm that the router can be properly connected to the network, then Windows 7 here basically do not need to set up, in the early Windows XP, but also to create a network connection every time, seems to be in Windows 7 also saved, default all to the operating system to complete.

2, connect model computer--ADSL modem of ADSL computer dialing set method.

For friends who do not have a router, you need to make Ppoe dialing settings on Windows 7 and set the method as follows:

A, in Figure 1--Change the network settings--click to set up a new connection or network. Then select the first item "Connect to the Internet" (Figure 3 below)

As the machine is already connected to the network, the following interface appears (Figure 4 below):

We chose "still to set up a new connection" (Figure 5 below):

Select the broadband Ppoe connection (Figure 6 below):

Enter your Internet account and password. Incidentally, a lot of notebooks, such as wireless network card and wired network card, such as the use of wireless network card is also set up in this selection of wireless (W) can be switched to wireless networks. Configuration method is similar.

Two, the Windows 7 General modem telephone dial-up Connection setting method

1. Connection model for computer--Telephone dialing setting method of ordinary modem

Friends using analog dialing may not be much now, but let's introduce the option of dialing (D) in Figure 6 above (turn the modem on or off, of course), as shown in Figure 7 below.

Enter your phone number, username, and password in the figure above to create a modem dial-up connection.

Small note: In Figure 1, Windows 7 Network settings Many features are interleaved, multiple different locations can achieve the same settings, such as ordinary dial-up users can be directly in Figure 3 location to set the dial-up connection can be set up, you can also "connect to the workspace"- Direct dialing to set modem dialing, the result is the same, just enter the position is different.

What are some practical ways to install Windows 7 from your hard disk

Keywords: hard disk installation, installation system

Method 2, taking advantage of Windows 7 own startup files and repair features:

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the d:win7 directory under the bootmgr and boot, EFI, source copy to the C-packing directory, for the upcoming Windows 7 start to do preparation documents;

D, enter C:BOOTBOOTSECT.EXE/NT60 C: At Windows Vista's cmd command-line prompt, excluding the comma after C: successful indicates that the repair boot boot was successful (booting to Windows 7 's boot file);

E, close the command window and restart the computer, will automatically enter the Windows 7 installation interface, choose the installation language, setting time and keyboard, etc.

F, the "Start Installation Interface", the days of special reminder to do not click "Install Now" but click on the lower left corner of the "Repair computer", enter the "System Restore Selection", select the Last "command Prompt" to enter the DOS window. We in order to save a startup disk pocket a big circle finally into the DOS;

G, enter "D:win7sourcessetup.exe", do not quoted, start installing Windows 7;

H, choose language and keyboard settings, format c disk, start installing Windows 7;

3, the original operating system for Windows 7 hard disk installation of the new Windows 7 method:

A, the Windows 7 ISO image is extracted with UltraISO to D disk (such as d:win7);

B, the Boot press F8, select "Repair System", select the keyboard, enter the administrator password, select the last command to repair (command Prompt);

C, enter "D:win7sourcessetup.exe", do not quoted, start to install Windows 7;