How do I Win7 the "illegal operation" failure when running the application?

First, the reason analysis

1, sometimes when the program runs without the installation of a sound card driver will also produce such failures, such as landing on the battlefield, if the driver does not install the sound card, the runtime will produce illegal operation errors.

2, the software is incompatible with each other;

3, the system file may be changed or corrupted. If this cause then open some of the system's own programs will appear illegal operation prompts;

4, the driver is not properly installed, such failures generally appear on the graphics driver, sometimes in the open some Web pages illegal operation prompts.

5, the quality of the memory strip is not good (sometimes increase the memory delay time will be the system default of 3 to 2 can solve this type of failure).

Ii. the specific meaning and solution of "illegal operation"

1. Stop Number: 0x0000002e

Description text Ata-bus-error

Reason analysis: System memory parity error, usually caused by hardware problems.

Workaround:

1 Remove all newly installed hardware (RAM. Adapters, hard drives, modems, and so on).

2 Run the system diagnostics software provided by the computer manufacturer, especially the hardware diagnostics software.

3 Disable BIOS memory options, such as cache or shadow.

4 Ensure that both the hardware device driver and the system BIOS are the latest versions.

5 Use the system diagnostics provided by the hardware vendor to run a memory check to find faulty or mismatched memory.

6 when available as a list of systems after startup, press F8 shortcut, on the Windows Advanced Options Menu screen, select "Start VGA Mode: And then press ENTER, if this does not solve the problem, you may need to replace the different video adapter list, about the supported video adapter list."

2. Stop error Number: 0x0000000A

Explanatory text: irql-not-less-or-equal

Reason analysis: The driver used an incorrect memory address.

Workaround:

1 If you cannot log in, restart the computer, if there is a list of available systems, press F8 to enter Safe mode, on the Windows Advanced Options menu screen, select Last Known Good Configuration, and then press ENTER.

2 Running all system diagnostics software, especially checking memory

3 Disable or remove newly installed hardware (RAM, adapters, hard drives, modems, etc.), drivers or software.

4 Check that all new hardware or software is properly installed. If this is a new installation, contact the manufacturer of your hardware or software for any Windows updates or drivers that you may need.

5 Disable BIOS memory options, such as cache or shadow

3. Stop error Number: 0x0000001E

Explanatory text: kmode-exption-not-handled

Reason analysis: The kernel-mode process attempted to execute an illegal or unknown processor directive.

Workaround:

1 Ensure there is sufficient space, especially when performing a new installation.

2 If the Stop error message indicates a specific driver, disable the driver.

3 If you cannot start your computer, enter Safe mode at boot time to remove or disable the driver.

4 If you have a video driver that is not supported by Microsoft, try switching to the standard VGA driver or the appropriate driver provided by Windows.

4. Stop error Number: 0x00000023 or 0x00000024

Explanatory text: Fat-file-system or Mtfs-file-system

Reason analysis: The problem appears in the Ntfs.sys (allows the system to read and write to the driver file for the NTFS drive).

Workaround:

1 run the system diagnostics software provided by the computer manufacturer, especially the hardware diagnostics software.

2 Disable or uninstall all anti-virus software, Disk Defragmenter or backup program.

3 Check the hard drive for damage by running the chkdsk/f command at the command prompt, and then restart the computer.

5. Stop error Number: 0x00000058

Explanatory text: Ftdisk-intern-error

Common Cause: A primary drive in a fault-tolerant set fails.

Workaround: Start your computer with a Windows Setup disk, boot from the Mirror (2nd) system drive, and search for "edit ARC path" at the Microsoft Support Services Web site for instructions on how to edit the Boot.ini file to point to the mirror system drive.

6. Stop Number: 0x0000003f

Explanatory text: no-mor-system-ptes

Reason analysis: The driver is not properly cleaned.

Workaround: Disable or uninstall all anti-virus software, Disk Defragmenter or Backup program