How does a 32-bit system use 4 GB memory or above? How to Create a memory disk: 32-bit, 4 GB

How does a 32-bit system use 4 GB memory or above? How to Create a memory disk: 32-bit, 4 GB

After installing RamDisk Plus, make sure that the PAE mode is enabled for the system. Then, you can create a memory disk.

Open the installed RamDisk Plus software and click "file"> "Memory". The computer has a total memory of 3335 MB, and the available memory is MB. Click "unmanaged ".

We need to configure the memory.

Click "enable unmanaged memory usage" and then click "OK ".

Check that unused memory is enabled successfully. Finally, it is "disconnected.

I would like to emphasize that if the "Reserved" value is 0 after enabling the unused memory, we strongly recommend that you re-configure it to manually retain the point capacity, these capacities may be for the BIOS, or for the integrated graphics card. They are reserved with a memory of 1-MB. If you do not want to give them a blue screen when creating the memory disk, please be careful! My notebook can automatically detect the reserved value of MB, so it was very smooth to create a memory disk.

Enter the configuration page again, remove the hook before "auto search Retention Value", and manually enter a certain size. This step is not necessary. You can first check whether it will be a blue screen. Let's talk about the blue screen!

After returning to this interface, the memory situation is completely clear. My notebook has a total of 2556 MB memory, excluding the 84MB reserved value. The MB memory system is in use, and the remaining MB? Success !! It seems that some capacity is lost. No matter, Mb is enough.

The memory is enabled, and it is time to create a memory disk. Return to the main interface and click "+" in the upper left corner.

The "add RAM disk" Wizard is displayed. Click "Next ".

Do you still remember how much unused memory capacity my notebook has? It is 2556 MB. If it is too large, it will occupy the memory available for the system.

When the disk is removed or restored, the memory is cleared. This is a waste of time. When the computer is powered off, the memory is cleared.

Assign a drive letter to the disk to be "Born". You can just select one drive letter. I usually like to use the drive letter "R". I am worried about conflicts with other software, this drive letter is relatively backward and is not used by general software.

Here I want to hook up the <create "\ temp" folder>. As I said, when the memory disk is powered off, all the data will be lost, and even the folder will be lost, I want to use this disk to save temporary webpage files and temporary system files, so I want to automatically create a \ temp folder when the disk is turned on, so that the system or browser cannot find the folder to work normally.

After setting, click "finish" to create a MB memory disk.

After creating a disk, a dialog box is displayed in windows 7 asking if you want to format the disk. The software has already formatted the disk. Click "close.

Memory disk "here "! If you have created a memory disk, do not think it is useless. This disk is very useful! "For more information, see the next section ".