How does a barcode printer print out self-adhesive labels with spacing?

When you use a barcode printer to label paper, the settings are similar, first you need to test the label paper, and then in the software to set the size of the label paper. The print software can use the current most versatile bartender, the driver can also use the General Seagull Drive, below Shenzhen mutual trust and constant technology on how to set the interval of the label paper to explain. This article takes the TSC ttp-342e Pro Barcode Printer As an example to set up!

1, assuming that the user has finished typesetting, the content is as follows, and then the next is the printing of the setup problem

2. Select "Print P" from the print menu

3, in the pop-up to the mine box select "Property (D)"

4, select the volume, and then select the media type "spacing label", spacing height needs to be set, generally 2-3 mm, mostly 2 mm, after printing operation select "RIP", so that after printing the last label, the printer will automatically go to the spacing of the paper, convenient for users to tear paper, refer to the following figure:

Note: This setting method is almost the same as all barcode printers, and to be in print when the setting to take effect, how to set the spacing of the label printing is also the majority of users encounter problems, I hope that the above set steps to solve the majority of the problem, to provide everyone's work efficiency! If there is a problem, you can visit Shenzhen Trust Heng Technology company's official website, to seek technical support!