The following is an example of a USB 3G network card, which describes the detailed steps:
1, the following figure shows us to open the Internet equipment;
2, now we buy the 3G online card into the Internet equipment installed in the following image shown;
3. Now we will connect the Internet equipment (3G Internet equipment) to the computer that needs to be connected to the Internet. Then we plug the computer into the USB interface;
First use we will pop up a drive state installation progress bar as shown below.
4. If the installation is successful, we will see a driver in the "computer" as shown in the following figure.
5, set the location of the installation program, click "Next";
6, installed will show in your computer desktop created a shortcut to the Internet icon;
7, point now we want to use it directly double-click to start on it;
8, finally we click on the interface " connection " turned red, click on the Internet.
The connection is successful will be able to surf the internet Oh, set very simple bar.