How does a tplink router set PPPoE to access the Internet?

If your internet access method is PPPoE dialing, that is, your network service provider (China Telecom or China Netcom) provides you with a set of user names and passwords, and you need to use PPPoE (broadband connection) to dial up the Internet, follow these steps:

 

[Physical connection]

1. Connect the network cable derived from the cat to the WAN port of the router. The computer uses the network cable to connect to port 1-4 of the LAN of the router.

 

2. Check the indicator light. When the router is running normally, the power indicator light (PWR) is always on, the system indicator light (SYS) is flashing, and the WAN port and lanport are always on or flashing.

 

If SYS is always on or off, it indicates that the router is faulty. If the LAN or WAN indicator is not on, check whether the physical connection is properly connected. For example, the network cable is not connected or the network cable has poor contact with the interface; if the connection is normal but the indicator light is not on, the network cable may be faulty. We recommend that you change the network cable.

 

[Set vro]

1. Enter the IP address of the router LAN port in the browser, enter the correct management user name and password of the router in the pop-up box, and then enter the management page.

If the router is set by default, the management address is 192.168.1.1. The username and password are admin.

2. Select "network parameters" & rarr; "WAN port settings" in the left box, and select "PPPoE" in "WAN port connection type" in the right border ". Enter the user name and password of the broadband account in "Internet account" and "Internet password.

 

? After you enter the internet password and save it, the password length in the password box may not match the actual number of digits you enter. This is the built-in password protection mechanism of the vro, as long as you confirm that the entered password is correct, the vro has saved the settings.

? Connection mode selection:

"On-Demand Connection"It is recommended that you select timed Internet access. When data is accessed, the router will automatically dial the connection. If no data exists, the network connection will be automatically disconnected within the specified time.

"Automatic connection"We recommend that you select monthly subscription. The vro will be automatically reconnected after power-on or disconnection.

"Manual connection"That is, manually click the connection to dial up, the router will not automatically dial up.

Click "save" after setting ".

3. For dial-up connections or disconnections, click the "running status" column in the left sidebar of the management interface, and clickConnection/disconnectionButton.

After dialing the number, you can view the IP address and DNS address obtained by the router in "WAN port status". If no DNS server address is set on the computer, enter the DNS server address displayed on the WAN port to your computer.

 

4. Now, the PPPoE dial-up is complete and the dial-up is successful. The computer under the vro can access the Internet through the vro.