When using a wireless router, three passwords are involved: wireless password, router management password, and broadband password. You can change the passwords on the screen of a touch-screen router.
The following describes how to change the password on the screen.
1. Change the wireless password
The wireless password is the Wi-Fi password. The method for changing the wireless password is as follows:
Click the touch screen using a touch pen and enter the administrator password to enter the settings page. Click
Set, As follows:
Click
Wireless Settings, As shown in the following figure:
Click
Primary Network, As shown in the following figure:
Click
Wireless passwordYou can modify it, as shown in the following figure:
Note:: The guest network password of the touch-screen router cannot be set manually. You can set regular updates.
Note:After the modification is complete, wireless terminals that have previously connected to this wireless signal need
Delete a configuration fileAnd then use the new wireless password to connect.
II. Change the management password
The management password is the password you need to enter when logging on to the vro management interface. For the modification method, see the following:
Click
System Settings, As shown in the following figure:
Click
Manage password settings, As shown in the following figure:
Enter the original management password and reset the new management password.
3. Change the Internet bandwidth password
The broadband password is the password for broadband dial-up Internet access, provided by broadband carriers (China Telecom, China Unicom, etc. Generally, you do not need to change the password of a broadband account. However, if you change the bandwidth or have a new account, you can enter the new account password on the screen. The modification method is as follows:
Click
Network Settings, As shown in the following figure:
Click
Broadband dialing, As shown in the following figure:
Click
Account and password, Delete the original account and password, enter the new account and password, and click
Connection, Wait until the connection is successful.
