How does Apple Mac OS x install a dual system?

Apple's MacBook NB Heritage one of the customary style, the appearance of fashion, line is extremely beautiful, personalized interface super, its stability is a must, by the road chivalrous favorite. However, for some users who are accustomed to the MS Windows environment, just changing to the Mac OS x environment is extremely uncomfortable, and generally will install a dual system or virtual machine on the Mac. Based on my experience, I think PD virtual opportunities are better, but here's how to use the Boot Camp assistant from Apple's system to install the MSWindows OS.

Tools/raw Materials

Apple Mac Machine

Apple system disk

Windows system disk

First step using the boot Camp split disk

1. Select the "Go" button in the Finder toolbar and choose "Utility" from the pop-up menu:

2. In the utility pane that opens, select the Boot Camp Assistant program under the utility folder:

3. Execute Bootcamp program, open the "Bootcamp assistant" pane The first step, is bootcamp introduction, you can directly click the "Continue" button into the next step:

4. This step is an important step from the current hard drive to the system partition of the MS Windows operating system that will be installed. Can "use 32G" partition, can also be equal to split, you can also drag the middle of the small points according to the need to divide, depending on the use of the situation to decide. Win7 more space than XP, and if you will install more programs in Windows also suggest a bit more, but the general 50G should be enough:

5. Click on the lower right corner of the "Partition" button to start the partition, very user-friendly with progress bar display, and not like Windows system partitions just wait:

6. Wait a moment, partition finished, switch to the "Start installation Windows" interface, prompted to insert the system CD:

7. The system will automatically restart when the disc is inserted and the "Start Install" button is clicked in the lower right corner.

When the disc is restarted correctly, it goes directly to the familiar Windows Installer interface.

Step two to install Windows OS

1. After restarting into the partition interface, be sure to select the bootcamp partition, and then click the "Driveoptions (Advanced)" button:

2. In the next interface, click the Format button to format the partition in NTFS format:

3. The following operation is the same as MS Windows installation steps, such as direct installation process completed until the Windows desktop can be:

Step three driver for Windows installation

When the system is installed, if prompted to install the driver, do not install the integrated drive;

Use the Apple System CD-ROM with the Apple Computer to play the optical drive, let the system install the Bootcamp drive automatically, and double-click the Setup.exe program on the disc:

Open Welcome to the Boot Camp Setup program:

On the Boot Camp window, click Next, as shown above;

Then click "Next" all the way to complete all the drivers and software installation;

In the final step, we recommend the "Apple Software Update (Windows)" check box:

Click the "Install" button to start the installation, as shown above;

After installation, the machine will automatically reboot and enter the Windows operating system;

After entering the Windows system, we recommend and run the Apple Software Update software to update the driver:

10. When you need to switch the system in the future, you can hold down the ALT key when you turn on, the system selection function will pop up:

11. Press the key on the keyboard to select a good system and press ENTER to enter the corresponding system.

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join