How does LG G Flex connect to a WLAN? G Flex connection to WLAN method

1. Standby interface, pull from top down;

2. Long Press "WLAN" icon;

3. Select the WLAN network to connect to;

4. Enter the password and click "Connect". (When the network connection is successful, the WLAN feature icon will be displayed in the &wlan list on the top right of the phone screen.) ）

Note: If you are prompted for "validation errors," This is due to the incorrect connection password entered, it is recommended that you confirm the correct password before you re-enter it.

5. If some dedicated WLAN network needs to enter static IP, in the input password, select "Show Advanced Options" in the IP settings select "Static", in the following can be entered static IP.

If the above operation does not enable WLAN Internet access, please refer to the following steps:

1. Open wireless router wireless signal and ensure the router network function is normal, router connection password is more than 8 digits.

2. Verify that the signal sent by the router is supported by the mobile phone IEEE 802.11 b/g/n/ac (2.4GHz, 5GHz).

3. Check with the router's instructions or contact the router's customer service to verify that the router settings are correct.

4. Reboot the phone and reboot the router.

5. Use other devices to connect the router to see if it is normal, or to replace other router attempts.

6. If you can connect to another wireless device before, but now the connection fails, we recommend that you first "forget" the wireless device settings, and then search for new wireless devices re-enter the password connection.