How does one deal with the problem of Linux 9 screen installation on virtualpc?

Here, I will talk about the solution of Linux installation after VPC.
A screen with a high width is displayed at startup, and the screen is just a landscape. Don't panic. Restart the VM first. After grub appears, press "E" on the installed system, and then the configuration file of grub appears, move the cursor to the second line ......", Press "E", add a space single at the end of the line, and press "B" to restart. Then, the "single user mode" is entered ". After entering the file, enter VI/etc/X11/xf86config at the prompt, open the file, enter "/screen", and Program The relevant configuration items are displayed. Press the "I" key to enter the insert mode. Here, use the keyboard to move 24 to 16, Press ESC, and press SHIFT + :, enter WQ and press enter to exit. Enter init 6 and restart. The graphic interface is displayed again!
In addition, some people say that the screen does not move during the input process and there is no response. It is not a program error. I thought it was at first, but I don't have to worry about it. Follow the steps to enter the insert mode. You control the keyboard's primary key. Pull down... Find 24. Change to 16.

Next, let's talk about the VPC network settings. In this case, many users cannot open the network server in Linux, and cannot connect to their own computers to download files to the Linux system. Don't worry. This is because your VPC is a simplified version. You can avoid this situation by downloading a complete version of VPC in the sky Software Park. In addition, You must select your Nic after changing the parameter settings of the complete version of the VPC. Otherwise, Linux will still be unable to connect. In addition, in the VPC network settings, change to virtual conversion network. This can solve the problem that the network server cannot be opened.

continue with the FAQs about ADSL route setup.
to be honest, I have also met these problems, and they are quite tricky. I am a cat of Huawei tm800 and have the routing function and port ing function. However, when I used port ing, there was a problem with ing. When I was an old man, I asked my cat to go over it. Because I used the number of the cat, so I had no way to do it. After a long time, I finally found a solution. A friend who uses the ADSL route can give it a try. First download a sinfor NET 2.0 (this is a shared Internet software function) and then restore your cat to the factory settings. Next, set an ADSL bandwidth dial-up in the network connection of your computer's network neighbor, and change the IP address of the local connection to
IP: 192.168.0.1
mask: 255.255.255.0
Gateway: 192.168.0.1
means to set your computer as a network administrator and install sinfor NET 2.0. After installation, set your IP address: 192.168.0.1 mask in the System Configuration: 255.255.255.0 select broadband connection in the automatic dialing option and click test. It indicates that the connection is successful. Change the IP addresses of all computers in your LAN to 192.168.0. Random, mask: 255.255.255.0 Gateway: 192.168.0.1
so that all the computers in your LAN can access the Internet.
next we will talk about port ing and TCP mapping. This software is quite easy to understand. After downloading, you do not need to install and run it directly. Click Add ing and enter the port to be mapped.
for example, if my computer is 192.168.0.1 and my Linux IP address is 192.168.0.3
set
local port: 9065
ing Host: 192.168.0.3
ing port: 9065
pull the remarks as needed ~~~
after that, you can change your sa logon IP address to your current public IP address to see if you can log on to the server? OK. Haha. In addition, because it is a dynamic IP address, you can download a peanut shell for convenience. In this way, other people can directly access your sa through the Domain Name of the peanut shell.

Q: I am using ADSL to access the Internet. I want to create a single machine and complete everything, that is, how to set the IP address is wrong, when starting acwk, I set the IP address to 127. 0 .. 0.1. I cannot go up. I cannot switch to my real IP address. I always see information that cannot connect to the server.

A: Are you using an ADSL route to access the Internet or using a broadband connection? If you are using a broadband connection, so you can start with "download a sinfor NET 2.0 first (this is a function of Internet sharing software. We will talk about the ADSL settings later. Remember to set the IP address of your Linux system. 192.168.0. Any
The local machine that you dial is the gateway. When the server is enabled, the IP address entered is your Linux Intranet address, for example, 192.168.0.3.