How does Samsung LCD connect to a computer using VGA?

VGA cables are required for signal transmission through VGA. See the following figure for the cable appearance:

 

If you are using VGA to connect to your computer, follow these steps:

1. Connect one end of the VGA cable to the [rgb in] interface behind the display.

  

2. Connect the other end of the VGA cable to the analog output port of the host, for example, the Video interface shown in the following figure.

  

3. After the monitor and computer host are enabled, press the switch/confirm button in the lower right corner of the display border to stop when "simulate" is prompted in the upper left corner of the screen.