To install the SIM card of Samsung Galaxy S7 edge (6.0.1) G9350, follow these steps:
1. Insert the clip needle into the small hole on the simcato to bring up the clip. (Note: ensure that the snap-in pin is perpendicular to the small hole. Otherwise, the device may be damaged .)
2. Gently pull the simcato from the simcato slot.
3. Place the SIM, USIM, or UIM card in the card slot, and put the SIM, USIM, or UIM card on the card slot 2.
(Note: The dual-card slot cannot use two telecom cards at the same time in mainland China. · When a carrier card and a SIM card of another service provider are inserted at the same time, the carrier card is automatically connected to the 4G network, and the other SIM card is connected to the 2G network. If you set another SIM card to connect to a 4G network, the carrier card will become a 2G network .)
4. ① is slot 1 and ② is slot 2, as shown in the figure below.
5. The nano-SIM card is smaller and thinner than the Micro-SIM card and common SIM card.
6. Only Nano-SIM, Nano-USIM, or Nano-UIM cards can be used. The Nano-SIM card and MicroSD card cannot be inserted at the same time in Cato 2.
7. Place the golden contacts of the SIM, USIM, or UIM card downward in the simcato.
8. Re-insert the simcato into the simcato slot.