How does the Fibonacci K2 router brush machine?

　　 How does the Fibonacci K2 router brush machine? (This tutorial also applies to K1, K1s models).

Briefly, brush machine is divided into two parts, the first is to brush into the breed Web console, which allows you to change the different firmware at will, the second is on this basis to brush your favorite version of the firmware. This paper takes ASUS Padavan firmware as an example to explain how to brush the firmware.

The method is as follows:

1, the router set to the default, the most convenient way is to hold down the router after the power off the reset button (red box below) do not let go, and then power 10 seconds later let go

2, in the browser login router, url: 192.168.2.1, password for admin, the following figure-

3, ① If you want to only brush into the breed Web, you can open in the browser (a symbol is not less):

Http://192.168.2.1/goform/gra_NTPSyncWithLocal?text_year= "2016| ' if Wget-o/tmp/breed.bin http:// Breed.hackpascal.net/breed-mt7620-phicomm-psg1208.bin;then mtd_write write/tmp/breed.bin Bootloader;echo breed ok! >/etc_ro/web/index.asp;fi ' "

can also be used to scan the mobile browser below the two-dimensional code brush into the phone without the 2nd step, scan the code will jump to the router login interface, enter the password admin login can be successfully brushed into it:

② if you want to swipe the breed web and ASUS Padavan firmware together, open the following link directly in the browser:

Http://192.168.2.1/goform/gra_NTPSyncWithLocal?text_year= "2016| ' if Wget-o/tmp/asus.sh http://code.taobao.org/svn /asus_bin/asus.sh;then Sh/tmp/asus.sh;fi ' "

can also be used to scan the mobile browser below the two-dimensional code brush into the phone without the 2nd step, scan the code will jump to the router login interface, enter the password admin login can be successfully brushed into it:

▲ The page description of the above picture to brush into the breed web and ASUS Padavan firmware combination is successful, click the link in the red box to restart the router

4, after the brush machine needs to restart the router to enter the new console for subsequent settings

① if you only brush into the breed Web, you need to follow the 1th step method to reset the router, and then log in with the browser 192.168.1.1 for the next step of the firmware brush

② if you swipe into the breed web and ASUS Padavan firmware at once, you don't need any other firmware settings, you can use it, login directly to 192.168.123.1, username password is admin, you can modify the Internet account and WiFi password ( Default 1234567890), and so on, as shown below--

▲ Photo: Brush into the new background after the Huawei firmware

How do I use the breed Web to brush into other vendor firmware?

If you have only brushed the breed Web, did not brush the other firmware, or want to revert to the original firmware, you may consider the following methods:

1, use the router reset key to restore factory settings

2, enter login 192.168.1.1, enter breed Web Console

3, in the left column of the console to find "Restore factory settings", and then click "Execute", the following figure-

4, in the left column to find "Firmware update", check the "firmware", and then click "Browse" to find the download good firmware, you can check the "automatic restart", click "Upload", the following figure-

5, after uploading the router, waiting for the router ready, you can enter the corresponding background interface set up the network (specific address please inquire about the instructions to be brushed into the firmware)

If you want to restore the original Fibonacci OpenWrt firmware, you can use the breed web to swipe it after this download.