How does the computer host often freezes?

The following 26 reasons can cause slow or panic, please refer to and prevent, should be helpful to you

1. Installing too many operating systems on the same hard drive can cause system crashes or slow speeds.

2, CPU, display cards and other accessories do not overclocking too high, to pay attention to temperature, otherwise, in the start-up or run will inexplicably restart or panic or slow.

3, in the replacement of computer accessories, must be inserted well, because the accessories are bad contact will cause system crashes or slow.

4, the BIOS settings to be appropriate, although the recommended BIOS set to the optimal, but the so-called optimal is not the best, sometimes the best settings will cause startup or run or slow down.

5, the best to be equipped with voltage stabilizer to avoid voltage instability caused by the panic.

6, if there is a condition, add a UPS, so that the computer will not cause a crash after power failure.

7, the unknown to the floppy disk and CD-ROM, not easy to use, the software attached to the e-mail, to use KV300, rising and other anti-virus software to check and then use, so as to avoid infectious disease after the virus, it will be the system freezes or slow running speed.

8, in the application software is not the end of the normal, do not turn off the power, otherwise the system will cause damage or loss of files, causing automatic startup or operation of the panic. This is very important for systems such as WINDOWS98/2000/NT.

9, in the installation application software, if the prompt dialog box "whether to overwrite files", it is best to choose not to cover. Because the current system files are usually the best, it is not possible to overwrite the files based on the time sequence (unless you care about the time of the file).

10, when uninstalling the software, do not delete the shared files, because some of the shared files may be used by the system or other programs, once deleted these files, will make the application software can not start and panic, or the system running panic.

11, set up hardware equipment, it is best to check the retention of the interrupt number (IRQ), do not allow other devices to use the interrupt number, or cause IRQ conflicts, resulting in system panic.

12, in the loading of certain software, we should pay attention to the order, because some software programming is not standardized, in the operation is not ranked first, but to put in the last run, so that will not cause confusion in system management.

13, when running large application software (such as Office 2000), do not exit the running program in the running state, otherwise it will cause the whole Windows98 system crash.

14, in the case of small memory (such as 4MB-16MB), it is best not to run the memory of the larger application, or in the runtime prone to panic. It is recommended that you save the files that are currently in use when you run these programs.

15, for system files or important files, it is best to use the implied properties, so as not to delete or overwrite the files by mistake.

16, to modify the master boot record, it is best to save the original record, to prevent the modification failed to restore the original hard drive master record.

17, the best use of software test version, because the test version in a certain area is not stable, after use will make the system can not start.

18. Try not to run 16-bit applications in WINDOWS95/98 because 16-bit applications conflict with 32-bit applications in Windows, causing a panic or failure to start.

19, before upgrading the BIOS, you should determine the upgraded BIOS version, and should first save the original version, so as not to upgrade the error and the system can not start.

20, try not to use pirated software, because these software hidden in a large number of viruses, once implemented, will automatically modify your system, so that the system in the operation of the panic.

21, in the chassis, may contain a large number of dust, if the dust contact with the parts of the circuit, will make the system unstable or panic.

22, in the execution of disk defragmentation, do not run a large application software, or cause a panic.

23, with anti-virus software to check the hard drive, do not run other applications to prevent the system panic.

24, in the Internet, do not open too many browsing window at a time, resulting in insufficient resources, causing panic.

25, when shutting down the computer, do not directly use the power button in the chassis, because the direct use of power button will cause the loss of files, so that the next time can not start normally, resulting in system crashes or too slow%

Note : More wonderful tutorials Please pay attention to the triple computer tutorial section, triple Computer office group: 189034526 welcome you to join