How does the printer often jam?

For office workers, it's a bit of a headache to have a printer jam. What is the reason for the printer jam? In fact, there are many reasons for the printer jam, such as the selected paper quality does not meet the requirements of the printer, the loading tray is not properly installed, the printer contains confetti, the paper is being printed, paper sensor error and so on. Different problem solving methods are not the same, so what are the reasons for the printer paper jam, how to solve it?

Printer Jam What is the reason printer often jams solution

What is the reason for the printer jam?

Paper jams are one of the most common print failures in everyday printing, and the main reasons for causing jams are the following three:

First, damp with inferior paper or paper

If there is no problem checking the printer parts, then the biggest possibility is the paper problem. Poor quality paper is often accompanied by a lot of confetti, the printing process of paper into the machine, so as to the pressure roller, increase the possibility of paper jam.

Paper is too light and easy to jam, especially for double-sided printing, paper because after a heating and ink penetration after printing has been deformed, if the weight of the paper is less than 60 grams, then it is prone to paper jam phenomenon. Paper is damp, paper stained with wet, paper jam is also easy to appear.

Second, the software configuration is a problem

If the software is incorrectly set, there will be a paper jam, for example, the paper tray is placed in a different size, but the software settings are still A4-sized paper, so that a paper jam occurs. Sometimes it is not a hardware problem or a software problem, the printer does not have any paper, but the printer is still prompted to jam, this time can do to clear memory operations, clear memory operation method is also very simple. Press "Feed + clean + power" and press "clean" for 10 seconds.

In exchange for paper rollers

Third, spare parts aging

If a printer is used for more than 1.5 years, the spare parts will begin to age, especially the wear of the paper wheel, the paper roller and the separation claw, which is the main cause of the paper jam. If the printer paper has just entered the machine, it jams. This phenomenon is generally caused by rubbing paper wheel wear slip so that the printer is not in place, if the wear is not serious, scrub with a wet cloth several times can. If a period of time is used, a failure occurs. And at this time, you do not want to change the paper wheel, you can try to do a little bit of rubbing the paper, the paper wheel on the top of the leather cover, turn 180 degrees and then set on. Or take the holster off and wrap it around a few laps of tape and then put the leather condom on it, making it thicker in diameter and offsetting its wear. If a period of time is used and the failure occurs again, the pickup wheel has to be replaced to completely resolve the problem.

For laser printers, the pick-up roller is also the most easily worn part of the printer. When the paper in the paper tray is normal, and can not take paper, often take paper roller wear or spring release. There is not enough pressure to feed the paper into the machine. Take the paper roller wear, can not be replaced, can be used to wrap the rubber band method for emergency treatment. After winding the rubber band, the friction of rubbing paper increases, which can make the paper return to normal.