How does the wireless router set the speed?

Want more than one computer at the same time on the Internet, our first thought is the router, want to use notebook Internet convenience, of course, to choose Wireless, integrated above the wireless router has become the best choice. Although the wireless router can be used for more than one computer Internet, but the total bandwidth is certain, once the local area network occupied an excessive bandwidth, it will cause other computers can not normal Internet, so we have to control the speed of each computer's Internet, then how to set the wireless router network?

Tplink Wireless Router Set speed

Tplink wireless router should be more commonly used in a wireless router, we take it as an example to do a detailed introduction bar. First we fill in the address bar of the wireless router address, and then enter the corresponding user name and password, access to the router's operating interface, the operating address and the default user name and password can be found at the bottom of the wireless router.

Come to the wireless router configuration interface, we first click on the "DHCP server" option, where we can set up all the Internet IP address segment, want to learn more about what IP address is being used, we can click on the "Client list", Here is a detailed record of all the IP addresses that are using this router and the corresponding computer information.

Then we came to the "IP Bandwidth control" option, we should first check "Open IP Bandwidth Control", otherwise can not do the following operation, and then select the bandwidth line and fill in the bandwidth size, these should be truthfully filled out, if they are not clear, you can call the broadband provider.

Then we'll be able to set the speed. The first is to fill in the IP address segment, by just looking at the "DHCP server" option, we learned that the total IP address for Internet access and have used the Internet router IP address, want to limit the IP address of a segment only need to fill in the beginning and end of the location can be, if you want to limit Fill in the same starting and ending positions (the effect is not measured).

Then we need to choose the mode, there are two kinds of tplink mode, one is "limit the maximum bandwidth", one is "guaranteed minimum bandwidth", we can choose these two modes according to the demand of one of them, However, it is important to note that if you set the maximum bandwidth and minimum bandwidth for the same IP address segment, it must be logical, otherwise the rule may not be valid.

Then we can fill in the "Bandwidth size" option to limit the maximum bandwidth or guarantee the minimum bandwidth of the value, Unit is Kbps, note if you need to fill out, no words can not fill, and finally do not forget to check "enable", otherwise you fill out the rules will not be effective, and finally we only need to click "Save "The speed limit can be completed.

Not all wireless routers have bandwidth control functions, if not, you can not use the wireless router to set the speed of the Internet. Even if there is a "bandwidth control" function, set the content is not the same, such as Tenda, set is the speed of upload and download, but also can fill in the interval speed. No matter what kind of router, set the method is the same, the so-called a rationale, I believe that other wireless routers will not be everyone's.

Attention matters

When using Tplink to limit the speed of the Internet, do not forget to check "enable" and save, otherwise you make the rules can not be effective, this must pay attention to.

Different wireless router Setup methods may be slightly different, but they are generally the same.