The detailed setup steps for the iOS terminal connection to the wireless network are as follows:
The
first step , open the iOS terminal main interface, select
and click the
Settings menu, as shown in the following image:
Step two : in
setting The main interface, find a
Wireless LAN
(
or
Wi-Fi). As shown in the following illustration:
Step three : Go to the wireless local area network (or Wi-Fi) main menu, turn on the
wireless switch , search for and click on the wireless signal that needs to be connected. As shown in the following illustration:
Note : The signal name is set SSID, if you do not confirm the signal name, you need to connect to the router through the wired computer, through the browser into the management interface, click
Wireless Settings
>>
basic Settings
View the SSID, click Wireless
settings
>>
Wireless security settings
to view the wireless password.
Fourth Step , enter the wireless password. Click Join. As shown in the following illustration:
When "√" appears in front of the appropriate SSID, the wireless connection is successful. As shown in the following illustration: